View Full Version : Supra sidemount?
mb7050
10-31-2010, 11:01 AM
Has anyone here ever used a Supra side mount intercoolers ?
I found one for very cheap 100$ in perfect condition. Seller claims they are 14"X11"X5.5" so huge compared to stock units.
mb7050
10-31-2010, 11:21 AM
I found some specs not that huge but still huge improvement over stock ic´s
(93-98) MKIV Supra SMIC Specs ,
9.25" x 10.5" x 5" = 486 cubic inches ,
Inlet & Oulet are both 2.5" Diameter ,
Core ?
this is how they look pictures from google ...
http://www.acadianasportscars.com/parts/intercooler.jpg
http://mycomputerninja.com/~jon/forSale/7_29_09/16.jpg
http://snowfox.biz/supra/new/mh%20025.jpg
JasonY
10-31-2010, 11:35 AM
They dont really fit without extensive work.
Jason
mb7050
10-31-2010, 11:39 AM
I wouldnt expect them to bolt on thats for sure.
I already have front mounted oil cooler so I think 5 " deep isnt an issue
Anyone know the specs for stock ic´s
stealthee
10-31-2010, 12:01 PM
Not that it likely helps but my TSI had a Supra sidemount on it. Of course it was modified to fit, but if it can be made to fit a DSM it can be made to fit a 3s.
JasonY
10-31-2010, 12:09 PM
Stock IC's are 8x8x3 which other than depth is about as big of a frontal area that is possible to fit on the sides. The very small stock end tanks allow for fitment of the 8x8 IC. The larger end tanks found on non-oe application intercoolers doesnt really allow for a larger core.(just not enough height from the headlight bucket to the splash guards on the fornt bumper which i wouldnt want to go below the profile of the bumper itself especially on a lowered car. While i can tolerate angrily if my bumper rubs on a mother fucking speed bump(i hate those god damn fucking things) having the possibility of my intercooler hit is unacceptable and a serious oversight while choosing an intercooler setup.
The problem with the supra sidemount is the plastic end tanks and the one pipe heading straight out the top. The top pipe needs to come out at a 90* to the intercooler or its just gonna hit the bottom of the headlight bucket. My DSM's while they sit 2" too high are tight to the headlight bucket so the Supra ones would never fit without some squirrely piping put in to mount them differently.
Personally to me, it wouldnt be worth the trouble.
Jason
mb7050
10-31-2010, 01:24 PM
How about these 120$ each here..
http://www.xs-power.co.uk/images/Picture136.jpg
OVERALL
( 3.25" THICK )
( 18" LONG )
( 12" HIGH )
2.75" INLET AND OUTLET
edit: I dont know what was I thinking when I posted this way too big ...
mb7050
10-31-2010, 01:35 PM
or how about this 140$ each
http://www.prodigymotorsport.co.uk/catalog/images/forge/FMINT100.jpg
# Core Size: W204mm(8”)×H200mm(7 7/8”)×T118mm(4 5/8”) --2 row
# Overall Size:W210mm(8 1/4")×H325mm(12 3/4")×T130mm(5 1/8")
# Inlet/Outlet:φ56mm(2 1/4")/φ56mm (2 1/4")
JasonY
10-31-2010, 01:58 PM
The 2nd one shown could be made to work.
Jason
mb7050
10-31-2010, 02:09 PM
or these 160$ each
http://images.gasgoo.com/MiMgIzkwNzU3MTEwMA--/auto-part-toyota-mr2-intercooler-ty-inte-38.jpg
http://membres.multimania.fr/mr2/greddyintercooler.jpg
core length: 9"
core height: 7.5"
core thickness: 4"
inlet / outlet size: 2 1/4"
end to end length: 14"
good for + 400 hp each (3sgte)
JasonY
10-31-2010, 02:32 PM
I think the 14" overall height isnt gonna fit. Or will be extremely close to being below the profile of the bumper.
Jason
mb7050
10-31-2010, 02:41 PM
I think the 14" overall height isnt gonna fit. Or will be extremely close to being below the profile of the bumper.
Jason
its a shame if it doesnt fit it seems to be very capable core for the price.
JasonY
10-31-2010, 02:44 PM
bust out a tape measure ;)
Jason
mb7050
10-31-2010, 02:51 PM
I went ahead and took some measurements 14" isnt an issue!
I think these are very good sidemounts to replace the stock units.
wow these can be found very cheap
http://cgi.ebay.co.uk/TOYOTA-MR2-TURBO-SW20-90-95-INTERCOOLER-HUGE-CORE-DEPTH-/360313825170?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item53e460a792
I wonder would this electric fan do any good...
http://www.turbomr2.com/MR2/HowTo/Engine_Upgrade/Install/Images/1836_IC_Install.JPG
stockers
http://www.extremeturbosystems.com/images/3000GT-Intercooler-Kit-7.jpg
Atrosity
10-31-2010, 04:04 PM
If that fan works that would be pretty cool, but id rather put that fan on the oil cooler instead imo. For a budget I have always been a fan of 1G DSM sidemounts and you cut the pipes off the stock sidemount and weld it on the DSM one. Shazam! Decent IC on a budget.
mb7050
10-31-2010, 04:10 PM
or how about this 140$ each
http://www.prodigymotorsport.co.uk/catalog/images/forge/FMINT100.jpg
# Core Size: W204mm(8”)×H200mm(7 7/8”)×T118mm(4 5/8”) --2 row
# Overall Size:W210mm(8 1/4")×H325mm(12 3/4")×T130mm(5 1/8")
# Inlet/Outlet:φ56mm(2 1/4")/φ56mm (2 1/4")
I think I´m going to try this unit .
Seller claims its highly efficient and one unit is good for +450hp in Renault 5 Turbo he is running 39 psi !!
better sidemounts out there ?
mb7050
10-31-2010, 04:11 PM
If that fan works that would be pretty cool, but id rather put that fan on the oil cooler instead imo. For a budget I have always been a fan of 1G DSM sidemounts and you cut the pipes off the stock sidemount and weld it on the DSM one. Shazam! Decent IC on a budget.
I already have 10" fan on my 11"X11" oil cooler...
isnt the stock piping under 2" ?
mb7050
10-31-2010, 08:07 PM
any other good sidemounts out there ?
BjornRune
10-31-2010, 08:55 PM
I have Dejon sidemounts, they cost a bit and both cores cracked after about a year with 15Gs and 19psi. It was almost identical on both cores, developed leaks in the center of the cores about an inch in. Very hard to fix, had to cut them open and reweld.
Let me know if you find something that works, I like the sleeper look smic's give you. It's easier to hustle on the street haha.
mb7050
10-31-2010, 09:05 PM
I like sidemounts because they dont block my radiator and oil cooler oh I quess I have never been fan of fmics :D
dejon sidemounts cores are 8"wide x 8.75"long x 4" thick they are 13" long overall...
edit quoted from 3si
DSM : 8''x7''x2.75'' = 154 cu.in. (x2)
HKS : 8.5''x8''x2.75'' = 170 cu.in (x2)
Dejon : 8''x8.75''x4'' = 280 cu.in (x2) (as they were before)
Dejon : 8''x8''x3.5'' = 224 cu.in (2x) (as they are now)
http://www.prodigymotorsport.co.uk/catalog/images/forge/FMINT100.jpg
these are roughly 300 cu.in each
http://membres.multimania.fr/mr2/greddyintercooler.jpg
these are 270 cu in
mb7050
10-31-2010, 09:25 PM
gotta find specs for this ic looks huge
http://img90.imageshack.us/img90/4623/pb170123bw5.jpg
http://homepage.ntlworld.com/kevin.yeoman/BFSMIC_009_600x450.jpg
crasy thickness it appears to be 6.00" x 8.1" x 8.0"
388.8 Cubic Inches !
but I cant find it anywhere and the piping is all wrong :(
GTO Assassin
11-01-2010, 04:25 AM
One of the guys in Sydney Australia tried mounting some Supra SM coolers but ended up bailing out (I think). His name here is MR2 if you want to message him.
Gene from Gene's Performance custom made some kick ass side mounts. Not sure if he's a sponsor here. If he isn't, he definetly is at 3si.org
Scotty
mb7050
11-01-2010, 05:26 AM
http://i611.photobucket.com/albums/tt194/genesperformance/fab/SMIC/IMAG0055.jpg
Gene "8" tall 10" wide and 4.5" thick. with 2" end tanks overall height will be 12" "
so they are 360 cu in each
mb7050
11-01-2010, 05:52 AM
ooh shit i was quoted 200$ for 2 of these SHIPPED unused units . I think I cant refuse the offer, these are forge units for renault 5 turbo and normally retail at 600$ each !
http://www.prodigymotorsport.co.uk/catalog/images/forge/FMINT100.jpg
just for correction core size is 8x8x5
so they are 320 cu in not bad for the price
reallyxxxxxxloud
11-01-2010, 12:18 PM
I'd be in to two of them!!!!! They look way easy to fit compared to others you have shown...
TT Eric
11-01-2010, 12:21 PM
http://i611.photobucket.com/albums/tt194/genesperformance/fab/SMIC/IMAG0055.jpg
Gene "8" tall 10" wide and 4.5" thick. with 2" end tanks overall height will be 12" "
so they are 360 cu in each
And they work pretty well, I took them out, to put a FMIC because they stick under the bumber of the Stealth's, but I really like the performance I was getting from them.
Eric
Chris@Rvengeperformance
11-01-2010, 10:14 PM
One thing to keep in mind is as you increase core thickness you will have diminishing returns after about 3.5"
TT Eric
11-01-2010, 11:54 PM
One thing to keep in mind is as you increase core thickness you will have diminishing returns after about 3.5"
Yeah on a FMIC I agree, but the shrouds in this kit force so much more air through the cores to make it worth!
Eric
mb7050
11-02-2010, 06:18 AM
I´m going to use fan to keep temps in chech, heat activated fan control ...
Shrouding is very very important too espesially when using thick core,
like this
http://www.turbomr2.com/MR2/HowTo/Engine_Upgrade/Install/Images/1836_IC_Install.JPG
ok, all the stuffing around that I've done with the Supra SMIC's is here:
http://3000gt.com.au/car/SMIC/
it's simply a massive gallery showing you what you need to do to get them to fit...
1, move oil cooler.
2, get shorter or relocate freezer dryer (you could maybe get around this with a custom end tank)
3, relocate ABS if you have it (big PITA)
I've done everything bar doing something about the freezer dryer.
you will need to make custom end tanks for the supra ones and I can't weld at all so it may be cheaper toget someone to custome make a whole new set (I've been told 2K for both)
OBXBoost
11-02-2010, 12:13 PM
I'm curious at what point the fans actually become an obstruction versus assistance.
mb7050
11-02-2010, 12:33 PM
never if you mount it right...
mb7050
11-02-2010, 12:47 PM
thanks for sharing the photos
now thats what I would call a proper sidemount :D
http://3000gt.com.au/car/SMIC/ItFitsm.jpg
http://3000gt.com.au/car/SMIC/DSC00466.JPG
combined 972 cu in not bad for sidemounts
OBXBoost
11-02-2010, 12:56 PM
never if you mount it right...
Disclaimer: I'm not an air velocity engineer and I pulled all the numbers out of my ass for examples.
Well for argument's sake, let's assume a few things:
The fans are rated for free-flowing CFM (nothing in front of them but air)
The fans are mounted as a draw-through setup on the motor side of the intercoolers
The fans are tight against the intercoolers.
Here's my example (at idle):
Let's say one fan is rated at 350 open air CFM.
Mount it flush against an intercooler and you gain a restriction of 100 CFM due to the additional air resistance of the intercooler in front of the fan.
It will still be drawing 250 CFM while not moving.
Example 2 (While driving low speed):
Fan rated at 350 CFM constantly running flush against intercooler with an obstruction of 100CFM from the intercooler
Car is doing 35MPH and is providing 450CFM through the intercooler.
100CFM lost from intercooler obstruction is still efficient as the fan is rated at efficiently moving 350CFM.
Example 3 (While driving high speed):
Fan rated at 350 CFM constantly running flush against intercooler with an obstruction of 100CFM from the intercooler
Car is doing 65MPH and is providing 1,000CFM through the intercooler.
100CFM lost from intercooler obstruction is now attempting to push 900CFM through a fan that's only rated at moving 350CFM.
Yes, the fan will speed up past what it's rated but now is the restricting part of the equation.
Makes sense?
mb7050
11-02-2010, 01:21 PM
it sure makes sense, but I´m not going to arque with you.
I´m going to use slightly smaller fan than the ic core (6x6)
the fan that I´m using is rated at 450cfm its designed to use with intercooler and it doesnt cover the whole ic core...
.
OBXBoost
11-02-2010, 02:24 PM
it sure makes sense, but I´m not going to arque with you.
I´m going to use slightly smaller fan than the ic core (6x6)
the fan that I´m using is rated at 450cfm its designed to use with intercooler and it doesnt cover the whole ic core...
.
Just trying to help.
mb7050
11-02-2010, 03:15 PM
Thanks
I´m actually not sure should I use the fans time will tell ..
oohnoo
11-02-2010, 04:19 PM
Those will work no problem. You'll have to use reducing 90° couplers though. Might have to take a look at making some IF I can find some spare time....lol
ooh shit i was quoted 200$ for 2 of these SHIPPED unused units . I think I cant refuse the offer, these are forge units for renault 5 turbo and normally retail at 600$ each !
http://www.prodigymotorsport.co.uk/catalog/images/forge/FMINT100.jpg
just for correction core size is 8x8x5
so they are 320 cu in not bad for the price
mb7050
11-02-2010, 04:31 PM
I have a crazy idea floating in my mind ... Weldin two of these together in parallel each side :D
I know cu in isnt everything but that would be 1280 cu in combined :)
yeah...if you can fit them I'd do that..
Intercoolers usually work as a heat soaker not so much a direct interchange according to quite a few sites...so effectively you would only run the fans once your foot is off the loud pedal and under around 30kmh (yes, it's around this speed that the front air dam gets more pressure/air than any normal fan can push).
usually the heat just goes back into the air passing through the IC.
prob better off using a water spray on the I/C...but that's more weight...............
Oohnoo, if you do I'll buy them...my config as per usual will be far from normal though...I'm looking at dual entry into the intake manifold (so left IC goes into left side of intake, right IC goes into right side etc etc etc.
JasonY
11-02-2010, 11:31 PM
Fans are for water/air heat exchangers, i dont see them working well at all on a air/air application since an air/air IC acts more like a heat sink than an actual intercooler unless a lot of thought is put into engineering some REAL ducting and selecting the proper cores that allow easy air flow through the core or you will end up with a high pressure zone in front of the IC at speed and the air will simple go right the hell around them either through the radiator into the engine bay due to the 4x as large of an opening or simply find its way past the small openings for the sidemounts with the turbulence that is created at the front end.
I wonder what the air pressure is in the wheel wells while under way, creating or having a large LP zone back there for the passing air to try to fill would go a long way into making FMIC's a borderline poor choice for most people due to their known drawbacks.
Jason
yeah the shrouding of the SMIC's is paramount...be interesting to see the pressure zone readings for the wheel well too.
if you go to a thick SMIC I would recommend redesigning the front bumper to allow for a larger intake area and more shrouding to stop air escaping out the sides...somewhat like that angular Lambo.
mb7050
11-03-2010, 06:36 AM
prob better off using a water spray on the I/C...but that's more weight...............
Not necessarily heavy if I use headlight washers from eurospec 3000gt and tap it into exsisting sytem(windshield washer system) but spraying wind shield washer fluid to the ic´s bad ?
mb7050
11-03-2010, 06:52 AM
the fan that I might use is spal fan designed to be used with air to air intercooler up to 6" thick for excample spearco uses this fan with their 6" thick cores .
http://ww1.prweb.com/prfiles/2007/07/10/538877/e90335icomparison.jpg
http://image.superstreetonline.com/f/9207718/130_0608_53_z+spearco+intercooler.jpg
GTOJOE
11-03-2010, 08:28 AM
interesting thread. Will watch :D
OBXBoost
11-03-2010, 11:24 AM
I'd be curious to see an air temp log with a run using and fans versus a log with the fans removed to see what the intake air temp differences are.
AshyBone
11-03-2010, 02:38 PM
So What I'm wondering is what you plan on doing with the car after the SMIC's are put on. Is it just for DD or are we talking track purposes? I'm one of the people that are waiting for the Gene performance SMIC's, while I know that they are way way way way WAY over kill for my itty bitty sock 9B's when I upgrade my turbos I have nothing to worry about.
But why go through all the concern and annoyance of fans and intercooler spray when upgraded SM's and proper shrouding is really a world of difference for DD needs.
mb7050
11-03-2010, 03:24 PM
I have never daily driven my 3000gt´s in fact I rarely drive them like once in a month or so...
I plan to go with dr750´s. I want it to be fun street car.
The proplem I see with these ic´s is the flowpath . If I weld two of these together in parallel I would douple the flowpath.
http://img155.imageshack.us/img155/9656/intercooooooooooooooooo.jpg
Dude, you'd be redoing both endtanks for single pass no matter which way you go...dual pass ain't getting you anywhere! my concerns with using the spray is that even if you use the windscreen sprayer it's another 5kg of fluid...you'd probably get a better effect on your intake with injecting it as meth straight into the intake...
one BIG concern with a lot of Intercooler designs isn't so much the cooler itself, more that the end tanks are stupidly huge...they don't NEED to be huge (it's just more lag) instead you need them to be small and well tapered.
mb7050
11-03-2010, 07:52 PM
I already ordered 4 of these well see.
not bad for 400$
http://www.automoderna.lt/Images/vt_cooler_forge40.jpg
awesome dude, when you get a sec to rip the end tanks off please let me know what the final measurements are of the core itself :D
ooh shit i was quoted 200$ for 2 of these SHIPPED unused units . I think I cant refuse the offer, these are forge units for renault 5 turbo and normally retail at 600$ each !
http://www.prodigymotorsport.co.uk/catalog/images/forge/FMINT100.jpg
just for correction core size is 8x8x5
so they are 320 cu in not bad for the price
Sooo, how are you going to fit 4?
A few more thingo's...with the thicker cores your still ok as long as you make the air box infront of the SMIC large enough to build up pressure, also the thicker cores have lesser density fins, in effect your lesser dense fins trade off cooling transfer ability for air flow and the larger core gives you the option for considerably larger flow, I'm aware the density reduces capacity, but the trade off of more flow ability is way worth it..
for end tanks look at these...these are nigh on perfect!
http://3000gt.com.au/car/SMIC/F1intercooler.jpg
mb7050
11-04-2010, 11:50 AM
^that would be the best desing
The only reason I can see why aftermarket ic´s have huge endtanks is that they are much easier to manufacture
Some Bentley Le Mans race car Intercoolers
http://www.racecarwarehouse.co.uk/images_parts/parts/radiators/intercooler.jpg
http://www.racecarwarehouse.co.uk/images_parts/parts/radiators/intercoolers%20on%20shelf%201.jpg
If only I could find some nice premade end tanks like these .
http://www.evoms.com/Pictures/ProdImg/%7B6D5488F0-CEFB-49FA-B782-251F173FDBC2%7D.jpg
http://www.dimsport.es/ES/files/images/9ff_gt2_intercoolers.JPG
http://www.evoms.com/WebSiteUsers/evoadmin/evt700infopage/997TTICS.jpg
http://www.ctrdevelopments.com/Images/Intercooler%202.jpg
this is an interesting chart
http://www.awe-tuning.com/media/products/awe/b7_fmic/end_tank_cfd.jpg
http://i8.photobucket.com/albums/a41/viet_l3alla/endtanks.jpg
oohnoo
11-04-2010, 12:18 PM
Those type of intercooler that reverse the flow (dual pass) are very efficient. Just curious as to HOW or WHY you would want to weld two together. There's no room to do this on the sides unless your mounting them in the front of which I would just get my DualCore which has been proven many times over :)
I have never daily driven my 3000gt´s in fact I rarely drive them like once in a month or so...
I plan to go with dr750´s. I want it to be fun street car.
The proplem I see with these ic´s is the flowpath . If I weld two of these together in parallel I would douple the flowpath.
http://img155.imageshack.us/img155/9656/intercooooooooooooooooo.jpg
Atrosity
11-04-2010, 12:23 PM
Those type of intercooler that reverse the flow (dual pass) are very efficient. Just curious as to HOW or WHY you would want to weld two together. There's no room to do this on the sides unless your mounting them in the front of which I would just get my DualCore which has been proven many times over :)
+1 to this, love my Oohnoo DualCore!!!!!!
However even if these were in the front, you still will have a nice flow to your radiator as well it would look wierd.
mb7050
11-04-2010, 12:45 PM
Those type of intercooler that reverse the flow (dual pass) are very efficient. Just curious as to HOW or WHY you would want to weld two together. There's no room to do this on the sides unless your mounting them in the front of which I would just get my DualCore which has been proven many times over :)
They sure are efficient I´m just afraid of the pressure drop because the flowpatch is "only" 4x5.
I might ditch the idea of welding them together too much hazzle and overkill. .
I would like to find some pre made end tanks like these and convert them to singlepass .
http://www.ctrdevelopments.com/Images/Intercooler%202.jpg
mb7050
11-04-2010, 12:46 PM
Yeah I love the oohnoo dualcore too if this fails I might buy one:)
yeahhh, the width is something non negotiable (between the frame rails and the outter sides of the front bar I'm pretty sure you don't really want to go past 5" thick if you can avoid it, I think if you can get the length to around 12" and allow 1" on each end for end tanks it's about the maximum you'll fit...width I think your going to be maxed out at ~11-12" depending on length...if you go too long it will protrude past the lower damn or plate thing (not a bad thing imho, as you can always get a moulded plate made up to cover the bottom of your cooler etc.
blindmist
11-04-2010, 05:33 PM
the fan that I might use is spal fan designed to be used with air to air intercooler up to 6" thick for excample spearco uses this fan with their 6" thick cores .
http://ww1.prweb.com/prfiles/2007/07/10/538877/e90335icomparison.jpg
I wonder if these can be used in pairs right under the crash bar as a pair of FMIC? Would this be viable?
mb7050
11-04-2010, 05:40 PM
http://www.are.com.au/feat/techtalk/ic001ty.JPG
"This is our solution too cooling the Rotary. Maximum effeciency from this large core giving more cooling with less pressure drop. Relocate the oil cooler & we can make it even better. "
interesting reading
http://www.are.com.au/techtalk/intecoolersMR.htm
http://www.extremeintercoolers.com/tech.html
mb7050
11-04-2010, 06:01 PM
I wonder if these can be used in pairs right under the crash bar as a pair of FMIC? Would this be viable?
this spearco unit is
THE CORE ONLY : 6” / 152mm X 6” / 152mm X 22” / 559mm
THE COMPLETE ASSEMBLY : 6” / 152mm X 6” / 152mm X 27” / 686mm
one unit will cost you 1000$
and I read somewhere that one unit is still good for 600+ hp.
http://www.racetep.com/335ic.html <-- info
this is interesting :
"The internet is a great thing, BUT, there are so many false statements that people make sound so convincing. "I put a big front mount on my VL Commodore & there's no extra lag at all, it goes heaps better too". Treat this person with total distrust. The only accurate (note: I did not say honest, because he may be genuinely kidding himself) part is ' it goes heaps better'. It is a physical & scientific impossibility, to not have extra lag in this case.
If it was a Skyline or similar car, treat the person with some distrust & quiz them on both setups, as the system they replaced was certainly not optimized &/or the new system must be really suited to the car.
-- These figures are calculated for a system with perfect air flow, without disturbance from poor tank shape, poor core flow efficiency, gaps in pipes, no. of bends & many more factors, so the actual real world times will be slower !
-- The actual time a molecule of air takes to travel the system during , from idle, to 8500rpm., cannot be accurately calculated as the variables are immense. These four graphs are to help you get a handle on how important it is to run a properly designed system for street throttle response & race spool up. This is part of the reason a high stall auto, turbo, 4 cyl. drag car is usually allot more consistent.
-- Note: -- The smaller the engine capacity - or the lower the revs used - the more important the design is.
-- Boost has miniscule bearing on charge air speed/time - it changes the cfm. output, making the charge denser, BUT not the air speed velocity !
-- The lights on an ANDRA Xmas start tree are 0.400 of a sec. intervals.
-- We have been using these figures (in house developed computer programme) for years to help us design ic. systems for customers, maybe that's why so many of our customers speak so highly of the results our products provide.
-- Following are four PDF files to validate the above."
mb7050
11-04-2010, 06:12 PM
Those will work no problem. You'll have to use reducing 90° couplers though. Might have to take a look at making some IF I can find some spare time....lol
you mean ?
http://cgi.ebay.co.uk/2-2-25-SILICONE-90-DEGREE-REDUCING-ELBOW-90mm-H3-/140389323129?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item20afdb1179
but I would rather use this (better flow) :
http://cgi.ebay.co.uk/57mm-51mm-Silicone-45-Elbow-Reducer-Hose-Silicon-Black-/330370327892?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item4ceb9b2554
mb7050
11-04-2010, 07:37 PM
I did some measuring and I think this would be the absolute max for sidemounts with(out) relocating abs, oil cooler relocation is needed .
these bell cores
6.00thick 12.10tall 10.00wide 1296 cfm! $452.00 each A600121100
726 cu in EACH 1452 cu in TOTAL !
driver side end tanks (LHD)
http://www.bellintercoolers.com/Images/G_Tank_UC.gif
http://www.bellintercoolers.com/Images/G_Tank_LC.gif
passenger side end tanks
http://www.bellintercoolers.com/Images/G_Tank_UB.gif
http://www.bellintercoolers.com/Images/G_Tank_LB.gif
or maybe (this would be better choise for cooling efficiency)
http://www.bellintercoolers.com/Images/G_Tank_LD.gif
but then again if it were me I would go with
these cores
6.00thick 8.10tall 8.00wide 911cfm $269.00
cheap and "easy" fitment still plenty of cu in and cfm easily enough for +1000hp !
I can't see you fitting 6x12x10 without removing ABS n crap either way
ARE are awesome guys, shame the website is such a mess (or it was the last time I looked)...I've spent many many hours reading through everything they have to say.
mb7050
11-04-2010, 10:28 PM
I think the bell pricing is very affordable for the 6x8x8 I´ll see what the price would be w end tank fitted like in my last post.
mb7050
11-04-2010, 10:39 PM
I can't see you fitting 6x12x10 without removing ABS n crap either way
ARE are awesome guys, shame the website is such a mess (or it was the last time I looked)...I've spent many many hours reading through everything they have to say.
I would have to agree and who would need 2592 cfm thats like enough for 2000+hp...
I think by cutting the metal bracket near the ic. bracket that holds the ABS "crap" in place I could gain 0.5"-1" more room.
http://img266.imageshack.us/img266/6383/img0519ne.jpg
I want 2592 cfm :p
better off just getting the Gene SMIC's :p
mb7050
11-05-2010, 06:50 AM
So I got reply from Gene and Bell intercoolers.
Gene Ic´s 1500 $ w shrouds
Bell Ic´s 960 $ assembled w end tanks 2.25" piping
current is Lead-Time is (2) weeks
and I know gene smics have bell cores so just for the record :
12" tall 10" wide 4.5" Thick 850cfm thats what Gene says I couldn´t find specs for this core but I believe these could flow even more ...
8.10tall 8.00wide 6.00 thick 911cfm
So now I´m asking you guys again what would you think is the maxium core that could be used in stock location without removing / relocating abs ?
I think it would be more viable to go with 2" piping I already have DN pipes (2") ?
and btw. bell have pretty damn nice end tanks :)
and before anyone says end tank desing doesnt matter much.
http://img35.imageshack.us/img35/4958/intercoolerendtaaaaaaaa.jpg
"Let us now relate figure 8.22b to a sheet metal end tank (shown in fig
1.2a) and figure 8.22d to the smooth volute cast end tank presented in this
experiment (shown in fig 1.2b). You will notice that there is an 8% difference in
the loss coefficients of 8.22b vs. 8.22d. Ok big deal. Well as a matter of fact it is
a big deal. Now figure in the other end tank bringing the loss total up to 16%,
and then figure in all the bends in your intercooler piping. It all adds up doesn’t
it? Have you taken your spare tire out to save weight yet?"
and with dual smic´s it is quite a big deal huh ?
http://www.dvdtfab.com/intercoolertestlab.pdf <---end tank info
honestly, without relocating anything I trust Gene's to be the largest you'll fit, honestly unless your dedicated to relocating EVERYTHING from the outsides of the rails his kit will be hard to beat..I know it sounds like I'm selling his stuff, but I don't actually know how or have any reason to support it other than know how much stuffing around it's taken for me to even get to where i am.
mb7050
11-05-2010, 09:41 AM
yeah but 1500$ is a bit steep + shipping + taxes its going to be +2000$ here...
mb7050
11-05-2010, 09:59 AM
How would you think this would fit
6.00thick 9.00wide 8.00tall 1012Cfm $293.00 A600090080
At Bell they said in any cases In/out should NOT be less than 2.25" !
some badass cfm ratings and still kinda cheap setup.
http://img703.imageshack.us/img703/8868/img0523.jpg
http://img574.imageshack.us/img574/7320/img0532.jpg
http://img683.imageshack.us/img683/1734/img0529li.jpg
http://img543.imageshack.us/img543/7426/img0530m.jpg
http://img135.imageshack.us/img135/3483/img0528d.jpg
http://img543.imageshack.us/img543/601/img0525l.jpg
http://img443.imageshack.us/img443/7013/img0526s.jpg
TonyM
11-05-2010, 12:17 PM
That's a pretty tight fit for a 6" core. You're going to need to move the core up to nearly the edge of the crashbar to clear the ABS.
Do the 9"W and 8"T dimensions include endtanks (doubt it). If not, I think that'll bust you on height or width depending on endtank orientation/design.
If it's doable, the dual pass design will at least minimize the height of the loop-side end tank, but you'll save maybe and inch? At most?
I really like the desire for large SMICs, I went back to a stock setup as the FMIC was just killing my cooling and a/c. Plus for a street car with 13T's, I prefer sleeper and the FMIC wasn't necessary.
mb7050
11-05-2010, 07:00 PM
That's a pretty tight fit for a 6" core. You're going to need to move the core up to nearly the edge of the crashbar to clear the ABS.
Do the 9"W and 8"T dimensions include endtanks (doubt it). If not, I think that'll bust you on height or width depending on endtank orientation/design.
If it's doable, the dual pass design will at least minimize the height of the loop-side end tank, but you'll save maybe and inch? At most?
I really like the desire for large SMICs, I went back to a stock setup as the FMIC was just killing my cooling and a/c. Plus for a street car with 13T's, I prefer sleeper and the FMIC wasn't necessary.
no those are just core dimension complete assembly is 14"tall so its 0.5" too tall but not a problem you can easily heat the underplastic and mold it to make it fit on 2gen cars 1gen on the other hand will have a problem...
Dual pass 1" gain isnt much and there are other cons too .
for example 650awhp~(780CHP] car would need a total of about 1,180 CFM (compressor inlet)so 590 CFM for each Intercooler the cores I choosed (8x8x6) are 911CFM each total of 1811CFM overkill ? Yes but still not too large and just for the record dual 8x8x4.5 is well enough for 650awhp with still some room to left. 1000CHP would need about 1530CFM combined...
The reason I would choose bell over gene´s is the Bell end tank design and price ofcourse If the price would have been same I would have choosen gene´s ic´s but as I said before 1500$ is a bit steep.
mb7050
11-06-2010, 02:20 PM
I'm looking at dual entry into the intake manifold (so left IC goes into left side of intake, right IC goes into right side etc etc etc.
how and why would you want that ?
Less Lag..the pass side(your driver side) goes half way around the engine...this way it just goes straight back up and in.
GTOJOE
11-07-2010, 01:15 AM
Less Lag..the pass side(your driver side) goes half way around the engine...this way it just goes straight back up and in.
would you be putting some sort of divider in the middle of the plenum? I would think the due entry would cause too much turbulance.
honestly have not decided...might do twin throttle bodies...twin plenums...nfi
GTOJOE
11-07-2010, 06:55 AM
how much power are you aiming for? 600 can be had on a stock plenum. Just buy a good aftermarket one and be done with it. Twin inlet plenum is more trouble than it's worth.
it's not the power that has me doing it...I want a shorter inlet tract...anything further I figure I'll look at how the skyline and 300zx guys do it when I get that far :)
GTOJOE
11-07-2010, 08:04 PM
If your going fmic then just go for a single inlet on the opposite side. Talk to STM about the manifold to use. Going for smic makes it harder.
Basically I refuse to go FMIC unless i go Vmount...which we all know ain't happening in our engine bay :p there is plenty of room and things you can do with SMIC if you have the time interest and money :p
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.