PDA

View Full Version : The next generation turbo ???



Lugnut
10-30-2010, 11:46 PM
Technolical advances in the turbo as designed by BorgWarner/Full-Race.com

http://www.full-race.com/img/articles/efr-turbos/efr-overview-1.jpghttp://www.full-race.com/img/articles/efr-turbos/efr-overview-2.jpghttp://www.full-race.com/img/articles/efr-turbos/efr-overview-3.jpg

http://www.full-race.com/articles/borgwarner-efr-turbos.html

DocWalt
10-31-2010, 01:05 AM
Snazzy but I doubt it will really take hold for a while yet.

blindmist
10-31-2010, 03:30 AM
Snazzy but I doubt it will really take hold for a while yet.

I don't know why not. Everything is going to be OBD III and everything is going to be controlled by the ECU. This eliminates unnecessary vacuum lines, and allows the ECU to control the boost ALWAYS. Allowing variable boost. I bet it will take hold quickly, and I wouldn't be surprised if one doesn't end up on a 3s within the next 2 years.

DocWalt
10-31-2010, 03:38 AM
Requires a whole new way of doing things and no aftermarket parts will fit it (manifolds, IC piping, etc).

I see this technology being used on OEM products rather quickly, and maybe some aftermarket turbos for the time being, but in the future, yes, it will eventually take over.

blindmist
10-31-2010, 06:25 AM
Requires a whole new way of doing things and no aftermarket parts will fit it (manifolds, IC piping, etc).

I see this technology being used on OEM products rather quickly, and maybe some aftermarket turbos for the time being, but in the future, yes, it will eventually take over.

Well I was talking about OEM in the first place. I bet these catch on very quick. This idea has been presented before, just not this clean and actually really done quite like this.

Although, I don't know why you say IC piping, it is just regular piping for the air charge. It uses a different flange type for the down-pipe/exhaust.

blindmist
10-31-2010, 06:32 AM
Fitment
Full-Race has worked closely with BorgWarner on application fitment and following the EFR launch, Full-Race EFR turbokits will be available for the following platforms:
Subaru

Subaru Rotated - EFR turbos are compatible with Full-Race's Subaru twinscroll kit in both Internal OR External WG configurations.
Subaru Stock Location - EFR .64 A/R singlescroll Internal WG turbos will be released by Full-Race in configurations that are bolt-in for stock location subarus **requires 3" vband downpipe**
Mitsubishi

Mitsubushi Evo 6/7/8/9 - EFR Twinscroll External Gate fitment only. Fits current Full-Race T4 twinscroll evo manifolds, as seen on Sierra Sierra's Time Attack Evo
Honda

Honda K-Series Sidemount (RSX/EP/K-Swap) - Full-Race's "sidewinder" K series customers have a plethora of EFR turbochargers to choose from in Singlescroll or Twinscroll options and Internal OR External WGs
Honda B-Series - EFR Twinscroll External Gate only, fits current Full-Race T4 twinscroll Top mount and T4 twinscroll Bottom mount
Honda R18 - EFR complete turbokit
Honda S2000 - EFR turbos in Internal OR External WG configurations on the brand-new forward mounted twinscroll S2000 manifold
Nissan

Nissan SR20DET - EFR Twinscroll w/ Internal OR External WGs & Singlescroll Internal WG . Fits current Full-Race Twinscroll top mount with or without WG tubes
Nissan RB - EFR Twinscroll w/ Internal OR External WGs & Singlescroll Internal WG Fits current Full-Race Twinscroll top mount with or without WG tubes
Toyota

Toyota 2JZ - Twinscroll w/ Internal OR External WGs Fits current Full-Race Twinscroll top mount with or without WG tubes. **2JZ now available in smaller runner configuration for faster spool/response
Toyota 3SGTE - Twinscroll External WG only **Exisitng Twinscroll bottom mount**
Applications Coming Soon For:

Mitsubishi Evo X
350Z/G35 and 370Z/G37
Honda '06+ Civic Si
Honda CR-Z
Porsche 996/997 Turbo

Like I said, shouldn't be long till one shows up on a 3s.

DocWalt
10-31-2010, 05:47 PM
Different routing of the IC piping for aftermarket, depending on the vehicle.

DocWalt
11-03-2010, 10:44 AM
Here's an article about the EFR turbos that goes really in depth. The lack of direct fitment onto common manifolds is going to hinder this turbo greatly. All of the big power guys are going to go with what's proven until we get some kind of new car that brings back the popularity of a car like DSMs or 240s or something.

http://www.motoiq.com/magazine_articles/articletype/articleview/articleid/1750/borgwarner-efr-turbo-feature-set.aspx

93STLTH
11-03-2010, 11:04 AM
Maybe LMI can get into the business of modifying these for our cars? http://curbjaw.com/images/Forum/Smilies/haha-spit.gif

beepbeep
11-03-2010, 11:14 AM
Maybe LMI can get into the business of modifying these for our cars? http://curbjaw.com/images/Forum/Smilies/haha-spit.gif


:lol7:

I see what you did thar....

vr4_rider
11-03-2010, 12:08 PM
I've been following this, and if the price is right, it'll be on my car before the year is over..haha. Right now I just have the regular 83-75. I hear these new turbos are baddass from a member on NASIOC...he saw one in action and saw a dyno sheet from it.

blindmist
11-03-2010, 01:52 PM
I've been following this, and if the price is right, it'll be on my car before the year is over..haha. Right now I just have the regular 83-75. I hear these new turbos are baddass from a member on NASIOC...he saw one in action and saw a dyno sheet from it.

You proved my point.

DocWalt
11-03-2010, 02:35 PM
He didn't prove anything until he installs them ;)

vr4_rider
11-03-2010, 03:05 PM
I can't even order it yet:-p I want the first to get this thing on the dyno:)

I got my eye on this one: 179357

DocWalt
11-03-2010, 03:13 PM
They kept these under pretty tight wraps up until now, haha. I wonder if the Evo X turbo will be a direct bolt on, or if they'll do the right thing and make it T3 flanged.... or if they'll keep the stupid stock 2 solenoid boost controller.

blindmist
11-03-2010, 04:23 PM
He didn't prove anything until he installs them ;)

Ok, Ill wait for my "I told you so!" :lol:

I love friendly bantering. So much more fun than hateful bantering.

Keyan
11-03-2010, 04:42 PM
is this that variable vein turbo that doesn't have a wastegate? Vw tdi's have been using these since early 00's. The sounds they make are hilarious

DocWalt
11-03-2010, 05:17 PM
I can't even order it yet:-p I want the first to get this thing on the dyno:)

I got my eye on this one: 179357

lol, googled the number to see what you were aiming for and your post on NASIOC came up. You're going pretty darn big!


Ok, Ill wait for my "I told you so!" :lol:

I love friendly bantering. So much more fun than hateful bantering.

That really overly friendly ;) smiley just makes it seem friendly :suspect: j/k, I'm not being hateful. I still don't think it will catch on readily if they aren't an instant bolt on for available manifolds. Nobody has their hands on them to prove it yet.


is this that variable vein turbo that doesn't have a wastegate? Vw tdi's have been using these since early 00's. The sounds they make are hilarious

No. Those things are funny though, saw a car with one last night with an exhaust. Hilarious noises.

vr4_rider
11-03-2010, 05:47 PM
LOL, it's not that big..it's only a 62mm turbo/55 trim.

DocWalt
11-03-2010, 05:53 PM
450-750WHP capable? It's big :p Have you posted pics of your current setup?

green-lantern
11-03-2010, 06:00 PM
Looks like a great turbo.

vr4_rider
11-03-2010, 06:09 PM
I have a mock up, but I don't like hype, so I will post when I get numbers and everything finished:)

vr4_rider
11-03-2010, 06:12 PM
450-750WHP capable? It's big :p Have you posted pics of your current setup?

I am aiming for 600awhp:) on e85 on an AEM EMS2.

I have a mock up, but I don't like hype, so I will post when I get numbers and everything finished:) It will be around the middle of December . It's my only car, so it WILL get done.

terrets
11-04-2010, 05:24 AM
Coooool. :D