View Full Version : Digital odometer conversion ?
mb7050
10-24-2010, 09:44 AM
Anyone have done it ? I need to change it into metric system and I really want to have digital odometer . Any ideas ?
Thanks
stealthee
10-24-2010, 12:55 PM
You'd likely have to go full custom. Its something I would consider doing myself as a future project.
Dakota Digital makes all kinds of digital gauges. I know there are more but they are the most prominent from what I have seen.
Austin@STM
10-24-2010, 01:06 PM
Yes they do make nice guages, you will have to take out your stock cluster and either cut a hole and put in one guage, or remake the entire panel with all digital guages, which would be pretty cool.
milkshakes
10-24-2010, 01:28 PM
A few people have done it before. Not many.
I'm not sure how easy it was.
-dLs-
10-24-2010, 02:07 PM
oh its not that easy. You consider all the idoit lights that go into that gauge and the gas tank and then RPMs and Speed. Most definately can be done, but never cheap. However get a bunch of people interested in it en masse and it can be done. Ive been looking into it and using something like my gsxr had with the rolling tach and digital spedo. however im a sucker to watch that needle go whheeeeeeeeee. problem i have with digital gauges is you MISS things. Im always about analog for making sure shits going how its supposed to. When you hit digital hard, it just skips certain spots and you dont get to see if its smooth or not.
-dLs- :twisted:
mb7050
10-24-2010, 02:34 PM
I already have quite nice gauges yes I know 11k is a bit too much
http://img689.imageshack.us/img689/2490/gauge1.jpg
http://img72.imageshack.us/img72/420/gauge4.jpg
there is no visible redline when its dark because the whole rpm face truns red @ 7200
http://img709.imageshack.us/img709/3135/gauge2.jpg
Something like this
http://t2.gstatic.com/images?q=tbn:gHIe4c3gxH-WDM:http://i42.tinypic.com/v6uesh.jpg
http://img.photobucket.com/albums/v480/walshja81/DSCN0480.jpg?1287941567
-dLs-
10-24-2010, 02:39 PM
ohhh, okay. So digital for milage for multiple read outs and is that RPMs on the top bar?
-dLs-
mb7050
10-24-2010, 02:41 PM
Yep digital for mileage
J. Fast
10-24-2010, 02:48 PM
THose gauges look really sweet! What do you want the mileage to start at? Zero or current? You could use a cyberdyne speedo sending unit and then wire the sender into a digi gauge for tach, mi, and etc. http://www.summitracing.com/parts/CYB-8901/Application/?prefilter=1
Jeremy
mb7050
10-24-2010, 02:51 PM
mileage should start at current
thanks
3kgtSL91
10-24-2010, 03:10 PM
shooter83 did that odometer digital conversion, i think there is a nice write up on that on florida3s
MK_94_3000GT
10-24-2010, 03:23 PM
Yep Evan can do pretty much anything haha
mb7050
10-24-2010, 03:30 PM
Yeah I know that thread but where could I find corolla gauge cluster with exsact same mileage as mine and metric units ?
http://florida3s.com/forum/past-work/16435-wip-digital-odometer-conversion.html
pezcore
10-24-2010, 07:07 PM
Yeah I know that thread but where could I find corolla gauge cluster with exsact same mileage as mine and metric units ?
http://florida3s.com/forum/past-work/16435-wip-digital-odometer-conversion.html
I KNEW it would be shooter :)
*edit - these smilies are all jacked : lol : is that rofl one I hate and ; ) is that wink & kiss smiley
stealthee
10-24-2010, 07:34 PM
Yeah and then : ( is mad. WTF is up with that
Yeah I know that thread but where could I find corolla gauge cluster with exsact same mileage as mine and metric units ?
http://florida3s.com/forum/past-work/16435-wip-digital-odometer-conversion.html
Just went through that whole thread and there is no walk through. :(
I would love to attempt something like this. It would match my RPM-side LCD screen quite nicely.
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.