PDA

View Full Version : rear diffuser



shmoo
12-01-2017, 12:08 PM
i’ve been thinking about a diffuser.

i’m between buying one (for a 350z, r32, or r33), And attempting to make one.

if i bought one, i’d be looking at 3 or 400 dollars + whatever modification expenses; where as if i make one, i could probably spend a third of that.

realistically, i can’t really know how it will perform, so why spend so much money?

so, i’m leaning towards making one, but my question is:

how should it be designed? should i just try to make it smooth from around the rear diff, and possibly curve up a bit towards the aft of the car?..

some of the pictures i’m seeing have an opening near the top of the diffuser(as seen installed on a car). should i attempt to get air to exit above the bottom of the diffuser?probably via ramming air in through ducts or something.

and should the exhaust be above the diffuser, or cordoned off in its own portion of the diffuser?

my problem is that i don’t understand the physics of it. high pressure above low pressure creates downforceż i just don’t quite get it. may i have some elementary level explanation of this phenomenon?

thoughts? pictures and diagrams/schematics, everything is cool

_isiah

nodoze
03-18-2018, 10:34 AM
Basically a rear diffuser works by smoothing the turbulent airflow and giving it direction .

By directing the airflow and smoothing it the air moves faster thus creating a lower pressure zone . The lower the pressure under the vehicle the more the above downpressure can be applied without having an upward force counter acting it .

The start point for the rear diffuser should he furthest forward not to obstruct and suspension components. Mine starts right infront of gas tank . So when combining a front splitter/undertray , the general flat nature of our car under body and a rear diffuser , the underside of the car should be fairly smooth .

Sent from my XT1650 using Tapatalk