Power door locks quit working - fuses are good

[stso9daa]

The door switch seems fine. Plus I have a parts car (that was totalled) that I have the DS door switch to test with and it doesn't work either. There appears to be always-on power to the two larger blue wires that go to the actuator. The brown striped shows no power.I can move the actuators by hand.

Neither door works. I am confused by the wires that go to the actual key lock on the door - what they are for?

Fuses all check out good.

Any ideas for tracing down issue. These worked before the car sat for about five months.

Thanks!

Randy:mitsu:

[93STLTH]

Check your plug connection at the door frame. You might have gotten some corrosion in there causing a bad connection.

[RealMcCoy]

Any other ETACS functions not working? does the security system arm?

[stealthee]

Check your plug connection at the door frame. You might have gotten some corrosion in there causing a bad connection.

Also check the connector in the door jam for broken wires. Its a somewhat common issue.