A buddy of mine did the machining on these adapters. The endless world of 2.5" springs is now open.
A buddy of mine did the machining on these adapters. The endless world of 2.5" springs is now open.
www.stickyvinylgraphics.com
Custom Stickers & Graphics
www.chumpcar.com
Regional Series Promoter for the ChumpCar World Series
very nice
Thanks man, I'm really stoked about it.
Looks badass, have any updated pics of your car. Ive been MIA from the forums for a while now.
CAUTION: Over Boosting May Cause Accidental Orgasm.
1993 Mitsubishi 3000gt VR-4
It's on jackstands at the moment. I'm finishing up the suspension this weekend to make an even friday after next.
Nvm I saw a thread with your video looks awesome!
don't they use standard 60mm springs stock?
Yes sir, but that's only 2.3 inch so the larger springs not only don't stay on center and hobble around, but the larger coil hangs off the edge of the perch by almost half the diameter of the spring. You can see in the pic the original red perch they came with, whereas the aluminum adapters fit the outter edge perfectly. Tough to see in the pic but there is also a centering portion that takes up the gap between the spring and the threads or shaft. (top and bottom)
oh yes!
3000gt.com 3000GT / Stealth International WWWboard Archive Jim's (RED3KGT) Reststop |
Team 3S 3000GT / Stealth / GTO Information daveblack.net |
Michigan 3S MInnesota 3S Wisconsin 3S Iowa, Nebraska, Kansas 3S |
North California 3000GT/Stealth United Society of 3S Owners 3000GT/Stealth/GTO Forums 3000GT/Stealth International |
3S National Gathering East Coast Gathering Upper Mid-West Gathering Blue Ridge Gathering |
Bookmarks