1st Gen 92 NA brake conversion with TT calipers and rotors

[lgvenable]

Well after searching, no joy with an exact thread on this forum:
except this one from the other 3S forum...

3000GT/Stealth International Message Center

my question is pretty simple, I'm running 9 inch moda r5's on my first gen all the way around, 245ZR40's all four corners.

Can I get by with just a conversion of the front TT calipers and rotors on my NA, or do I have to do the entire enchilada as in the referenced thread? The difference seems to be 467.00?

[13diamonds]

If i'm not mistaken it was later found since the dsm knuckles are the same as NA knuckles..You could use these adapter kits instead
RTM Racing :: MITSUBISHI :: DSM: 2g (95-99) :: Brakes :: Brake Upgrades :: Stealth/3000GT VR4 Brake Upgrade

[lgvenable]

Meaning, I simply need to bolt on TT calipers and a pair of Cobra rotors with the hardware mentioned? Thanks for the link; I think you just made up my mind and suppled me with the link to a VR4 conversion on my front brakes.
Larry

[lgvenable]

Is there any type similar kit, or brake set from an alternative car which csn be placed on the rear to give big brakes there too?