Gauging Interest: Aluminum Lower Door trim.

**Atrosity** · 10-05-2010, 10:54 PM

I have pictures off my phone but the quality of the picture is just not there. The Carbon fiber does not come installed. I will include it in the package, remember this is CF vinyl but it looks like real CF with the same texture, none of this fake crap. I want to say it is real carbon fiber with 3M adhesive. So you will see it stickied on some cardboard or abs plastic and you would have to super glue it to the piece yourself. This stuff is expensive and I am not making much from it, just enough to cover materials.

The hardware I used to install made this thing a headache to install so...back to the drawing board! I used toggle screws and the ones I had were to long so they would not expand once inserted. I need to find some smaller ones.

**terrets** · 10-06-2010, 01:21 AM

Ill take a set that says 3000GT without carbon fiber

. (when your finished). I want red inserts

.

And I want shifter trim, upper trim, and speaker trim when you get around to those

. These look awesome.

**Atrosity** · 10-06-2010, 11:53 AM

Originally Posted by terrets

Ill take a set that says 3000GT without carbon fiber

. (when your finished). I want red inserts

.

And I want shifter trim, upper trim, and speaker trim when you get around to those

. These look awesome.

I don't have any red inlays.

You can actually spray paint plexis glass with an even coat of red and super glue it on, I think it would look really good.

For the CF, they will not come glued on as that is up to you guys to do. I used simple super glue and just did the edges and came out really good, just be careful with it.

The CF will be precut and layed on cardboard ready to be glued on.

**terrets** · 10-07-2010, 12:43 AM

Ohk thats fine. Thats a good idea with the plexi. I bet it would look great! Im in no hurry for these cause my car sits over winter. So take all the time you need

.

**black98-3k** · 11-01-2010, 11:43 AM

I'll take a set. I have the microsuede material I did my headliner in so I can replace the CF with that. Is ther any plans for the shifter trim and other parts?

**Atrosity** · 11-01-2010, 02:19 PM

I have non logo door trims with out hardware currently for $60. + Shipping Let me know if you guys are interested, send me a pm.

**Geordon** · 11-01-2010, 10:01 PM

Originally Posted by Atrosity

The hardware I used to install made this thing a headache to install so...back to the drawing board! I used toggle screws and the ones I had were to long so they would not expand once inserted. I need to find some smaller ones.

How about alligator anchors?