OK I've done as much research as I can and this is what i've come up with:
G-FX OR7
17X8.5 5-114.3 35mm offset
would a 5mm spacer be enough or would I have to go with 10mm? and if so would I be looking at alot of wheel sticking out or not?
Thanks guys!
G-FX OR7 custom wheels in the Muskegon Area - Discount Tire/America's Tire
Don't need a spacer... offset is low enough...
Your 1993 Dodge Stealth is one of 6351 that received VIN numbers. Based on the order of the serial numbers, your car was the 5212nd out of the 6351 that were made that year.
Your car was built in the 3rd week of February 1993. Of the 47380 vehicles made at the Nayoga plant, your car was the 40537th vehicle to be created that year.
There are 281 other cars that were made with both the same interior and exterior color. There are 779 cars with the same exterior color and 2316 cars with the same interior color.
Note: The production order is assigned based on the order of the serial number.
thanks !
Posting Permissions
|
3000gt.com 3000GT / Stealth International WWWboard Archive Jim's (RED3KGT) Reststop |
|
Team 3S 3000GT / Stealth / GTO Information daveblack.net |
|
Michigan 3S MInnesota 3S Wisconsin 3S Iowa, Nebraska, Kansas 3S |
North California 3000GT/Stealth United Society of 3S Owners 3000GT/Stealth/GTO Forums 3000GT/Stealth International |
|
3S National Gathering East Coast Gathering Upper Mid-West Gathering Blue Ridge Gathering |
View Profile
View Forum Posts
View Forum Threads
Show All Albums
Private Message
View Articles
View Blog Entries
Reply With Quote
Bookmarks