6g72 forged cranks

[my923ksl]

looking to pick up 2 of these. pm me with what you have

[IPD]

pm baadvr4. i think he still has a couple that have been given the gucci treatment & everything.

[my923ksl]

yeah, i don't want any that have been messed with already.

[IPD]

if you want NEW cranks, order from mitsubishi directly. if you're looking for USED cranks, baadvr4's cranks have been expertly serviced, cryo-treated and nitrided. said treatment actually extends deeper into the surface of the crank that OEM spec, so technically, it's a "better than new part".

milt (baadvr4) has NEVER had an engine failure on any of his treated cranks. the jan 2012 COTM is his wife's ride, and is also running one of these cranks (and it's making 600awhp). i don't know precisely what you want, but if you want high-quality and reliable--you'd be hard pressed to find better.

[my923ksl]

if you want NEW cranks, order from mitsubishi directly. if you're looking for USED cranks, baadvr4's cranks have been expertly serviced, cryo-treated and nitrided. said treatment actually extends deeper into the surface of the crank that OEM spec, so technically, it's a "better than new part".

milt (baadvr4) has NEVER had an engine failure on any of his treated cranks. the jan 2012 COTM is his wife's ride, and is also running one of these cranks (and it's making 600awhp). i don't know precisely what you want, but if you want high-quality and reliable--you'd be hard pressed to find better.

ok...let me rephrase myself, i'm looking for a good USED CRANK. i do not want any cranks that have been cut or nitrided/cryotreated etc. if someone has one that needs to be cut i will have it done myself

[my923ksl]

bump, still looking for a couple cores

[BaadVR4]

Might be able to get a couple of good cores. Can't guarantee pristine, std size journals. If you can use a crank that needs to be turned .010" or .020", I might be able to find a couple. Even the spun bearing cranks (that can be fixed at .010") are getting hard to find and going up in price. LMK if you can use something like this. I would expect price to be $175 per crank shipped to lower 48. Thanks,
Milt