Disassembly: Manifold Pressure Differential Sensor

**awdonly** · 06-01-2012, 09:42 PM

Originally Posted by Greg E

Okay try this now:

CLOSE ECUFlash.
Go to C:\Program Files (x86)\OpenECU\EcuFlash\rommetadata\mitsubishi\3000 GT and open up your ROM's XML.
Open it with notepad.
Scroll all the way to the bottom and copy/paste this code before the </rom> tag.

Code:

	<table name="purge enrichment test" address="11126" type="2D" level="4" scaling="Hex16">
		<table name="X" type="Static Y Axis" elements="1">
			<data>make value = 0x0000 (stock = 0x0033)</data>
		</table>
	</table>

Save and close the file (might have to give admin permission)
Open up ECUFlash and your ROM.
Scroll down to the MISC section and locate the "purge enrichment test" table.
Change the value to "0x0033" like I instructed.
Save
Flash to car and report back.

Do you care if periphery2 bits 13 & 14 are enabled or not?

**Greg E** · 06-01-2012, 09:48 PM

Originally Posted by awdonly

Do you care if periphery2 bits 13 & 14 are enabled or not?

Leave them enabled.

**awdonly** · 06-01-2012, 09:49 PM

Originally Posted by Greg E

Okay try this now:

CLOSE ECUFlash.
Go to C:\Program Files (x86)\OpenECU\EcuFlash\rommetadata\mitsubishi\3000 GT and open up your ROM's XML.
Open it with notepad.
Scroll all the way to the bottom and copy/paste this code before the </rom> tag.

Code:

	<table name="purge enrichment test" address="11126" type="2D" level="4" scaling="Hex16">
		<table name="X" type="Static Y Axis" elements="1">
			<data>make value = 0x0000 (stock = 0x0033)</data>
		</table>
	</table>

Save and close the file (might have to give admin permission)
Open up ECUFlash and your ROM.
Scroll down to the MISC section and locate the "purge enrichment test" table.
Change the value to "0x0033" like I instructed.
Save
Flash to car and report back.

Just for clarity - I'm changing it to 0x0000 not to 0x0033 per the coded instructions.

**awdonly** · 06-01-2012, 09:58 PM

I changed purge field to 0x0000 and enabled periphery2 bits 13 & 14 (now at "1"), flashed, and.... no change still lots of clicking at purge solenoid after a few seconds of running.

**awdonly** · 06-01-2012, 10:01 PM

Originally Posted by Greg E

Yes

Hmm... Disconnect it from your LDCBC and tell me what happens. Worst case, I'll give you a patch to expose the boost gauge table and let you edit the values to be whatever you want.

Disconnecting is easier said than done... It gets 5v/ground from LCDBC - wonder if differnt sensor grounds are causing the delta.

**Greg E** · 06-01-2012, 10:46 PM

Originally Posted by awdonly

I changed purge field to 0x0000 and enabled periphery2 bits 13 & 14 (now at "1"), flashed, and.... no change still lots of clicking at purge solenoid after a few seconds of running.

okay, with ECUFlash open, right click on the "purge enrichment test" table
change the address to 11124
Hit okay
Make the value in that table "0x0000"
Save
reflash

If this doesn't work, there's still one more thing to try so don't fret.