Hey fellas I'm looking for an evo maf and harness.

Hey fellas I'm looking for an evo maf and harness.
Parting 6 speed
Pampena 3.5 Stroker, GTX 2867 Gen IIs, AEM Series2, oohnoo SMIC, DN Hardpipes, FIC 1650s, Walbro 525, aermotive fpr, Dejon intake pipes, Tial Q, Koyo Rad, Samco Hoses, Stoptech 332mm fronts, HKS GT4 Coilovers, Spec 4+ LW, JDM 6 Speed, Billet shift forks, Pampena brace

nevermind got one
Did you find a PnP harness or get a clipped one?
9B+93-13.2@108
16G+E85...?
the cake is a lie

still looking for that
Let me know if you find anything PnP. What are you doing for the EVO MAF in the stock bubble? Most people cut up a hockey puck, and do some fancy work. I was planning on just buying a 4" SS silicone joiner and a 3.25" to 4" silicone adapter for the MAF. I know the ARC2 guys with the 4" MAF just shove it in the stock bubble and clamp it down, so hopefully that works.
Turbo Piping
Pipe Reducer

I picked up a pigtail for $10 off ebay. The plug and play stuff is a lot of money for a little connector and the side that joins with the factory harness is a little shady, like the maft connector. I'd rather solder the wires and be done with it.
I was planning on the hockey plug thing, but your idea isn't bad, we'll see what it looks like when I get it here.
I did have a 3.75" maf just shoved into the stock bubble. It is possible that a simple round adapter could be used. Even the hardware store may have something usable.
|
3000gt.com 3000GT / Stealth International WWWboard Archive Jim's (RED3KGT) Reststop |
|
Team 3S 3000GT / Stealth / GTO Information daveblack.net |
|
Michigan 3S MInnesota 3S Wisconsin 3S Iowa, Nebraska, Kansas 3S |
North California 3000GT/Stealth United Society of 3S Owners 3000GT/Stealth/GTO Forums 3000GT/Stealth International |
|
3S National Gathering East Coast Gathering Upper Mid-West Gathering Blue Ridge Gathering |
Bookmarks