What would an AWD swap be worth/ whats needed???

[familyMAN]

Im trying to sell all the stuff.

You aren't converting to RWD are you?

[Maximal]

I'll give you $50 for it all.



Once you figure it out let me know, I've been kicking around the idea for a while now and if I can get a good deal on the parts locally I might jump on it.

[Austin@STM]

If your gonna come pick it up, i'll give you a good deal since that will save me a lot of work.

Heres what i got

25 spline trans rebuilt a year ago , output shaft is still good, but is worn.
25 spline t-case factory recall was done, spool is worn but again still held launches on slicks so, it'll work for now
5 speed shifter and cables, very clean and have bearings on the tranny end already
Stock driveshaft with under 80k on it, no vibrations
Complete rear subframe, with low mileage rear, good axles, and rear steering delete already done.
Front TT knuckles and axles, or just the whole front subframe with AWS rack if its easier.
Full set of TT brakes with newer rotors and pads

Not sure if the starter is different but i have that to.

Tell me what parts you want and tell me a price you think is fair.

-Austin

[Uniuno]

I'm looking for parts to do my own awd swap. Would you sell the parts separately? Esp the subframe mounts..

[green-lantern]

I'll give you $50 for it all.



Once you figure it out let me know, I've been kicking around the idea for a while now and if I can get a good deal on the parts locally I might jump on it.

That would be awesome Terry. If you do, take lots of pics and do a thread to help others that might want to do it. Also if you want some advice LMK. There are some things that I would have done different and there is a part I came up with that would work well but I'm not sure if it would be worth making it or not.

[Maximal]

If your gonna come pick it up, i'll give you a good deal since that will save me a lot of work.

Heres what i got

25 spline trans rebuilt a year ago , output shaft is still good, but is worn.
25 spline t-case factory recall was done, spool is worn but again still held launches on slicks so, it'll work for now
5 speed shifter and cables, very clean and have bearings on the tranny end already
Stock driveshaft with under 80k on it, no vibrations
Complete rear subframe, with low mileage rear, good axles, and rear steering delete already done.
Front TT knuckles and axles, or just the whole front subframe with AWS rack if its easier.
Full set of TT brakes with newer rotors and pads

Not sure if the starter is different but i have that to.

Tell me what parts you want and tell me a price you think is fair.

-Austin

I'll just need the t-case (which I might want to go with one in better shape), driveshaft, and rear subframe. Not sure if you have the brackets that are welded to the chasis that hold the rear subframe on but I'll probably need those too.

As for price I have no idea as I havent' planned on doing this so it's going to have to be pretty a pretty sweet deal to be completely honest.

[Austin@STM]

Like i said you tell me the price, and yes you will need the brackets as well as far as i know. I do have all of them if you need them.

PM me whatever you think is fair, since this is turning into a for sale thread.

-Austin

[mb7050]

why you selling ?