So who wants their ECU's "Chromed"?

[Greg E]

That is what I was hoping to hear, great! My only concern with the stock BCS is its ability at higher boost level. If it works just as well as others though, I would much rather have something that is PnP. Thank you.and keep up the awesome work. Now to find a VR4 ECU....

The stock FPR solenoid is probably the best runner up candidate if the BCS isn't up for the task.

[HLxDrummer]

Would somebody mind checking this out and telling me if it'll run my car normally? (1993 VR4). I intend that file to have closed loop disabled, secondary O2s disabled, but front O2s normal.
http://dl.dropbox.com/u/38123737/Sto...sed%20Loop.hex

Also, how do you guys that are running a LCD boost controller setup Evoscan? Greg says MUTIII for his setup but Blacksteath wants 1G/2G...

[Zybrainn]

Would somebody mind checking this out and telling me if it'll run my car normally? (1993 VR4). I intend that file to have closed loop disabled, secondary O2s disabled, but front O2s normal.
http://dl.dropbox.com/u/38123737/Sto...sed%20Loop.hex

Also, how do you guys that are running a LCD boost controller setup Evoscan? Greg says MUTIII for his setup but Blacksteath wants 1G/2G...

I'm getting this error message when trying to load it with ecuflash.

"ECUflash could not recognize this ROM image using any of the current definitions. You can choose one of the following options:
- abort using this ROM
- Use wizard to create new definition (not recommended!!! developers only)"

Here's where my ROM image is located using Greg's instructions. I might be doing something wrong of course.

C:\Program Files\OpenECU\EcuFlash\Chromed ECU v1.0\23861006.bin

Is there any reason you want to have closed loop disabled?

[Greg E]

You can put the ROM image anywhere, but you must have the XML file in C:\Program Files (x86)\OpenECU\EcuFlash\rommetadata\mitsubishi\3000 GT

Otherwise you will get that error message.

[Zybrainn]

You can put the ROM image anywhere, but you must have the XML file in C:\Program Files (x86)\OpenECU\EcuFlash\rommetadata\mitsubishi\3000 GT

Otherwise you will get that error message.

Yep I have the xml file right. He attached a .hex file so not sure if that makes a difference or not. Maybe he using a different chrome version than what I'm using.

C:\Program Files\OpenECU\EcuFlash\rommetadata\mitsubishi\3000 GT\23861006.xml

[ChargerX3]

Greg, it may be time for a Youtube tutorial for all of us lame brains. Might save you some headache along the way.

[HLxDrummer]

I'm running 1.0.1 so that is probably the problem. I disabled closed loop for two reasons: 1. Lean cruise 2. Help diagnose my problem. Getting rid of O2 feedback shows me either the ECU, an input to the ECU (MAF, TPS, etc.), or a mechanical problem is leading to the issue. Not my O2s, etc.

[Greg E]

Greg, it may be time for a Youtube tutorial for all of us lame brains. Might save you some headache along the way.

Let me get it all working/tested.... I wanted to do that for v1 but got too caught up in other projects.

p.s. my tuning services are available too.

[green-lantern]

Greg, it may be time for a Youtube tutorial for all of us lame brains. Might save you some headache along the way.

good thing we have his phone number.

[Greg E]

Yep I have the xml file right. He attached a .hex file so not sure if that makes a difference or not. Maybe he using a different chrome version than what I'm using.

C:\Program Files\OpenECU\EcuFlash\rommetadata\mitsubishi\3000 GT\23861006.xml

He's probably running a different version then.