So who wants their ECU's "Chromed"?

[Jesters Deadd]

I enabled bit 2 of periphery 0, now the trims are cycling like they should....BUT the car still has startup problems. 7 times out of 10 I need to unplug the injector resistor pack to start the car. It seems like its more of an issue on hot starts than cold starts. I have 2 sets of latency values for the same injector (delphi 1000cc/pte1000cc). I'm gonna trying switching the values to see if it helps. Also going to monitor fuel trims.

I had to change the published latency values for my rochester/pte 1000cc injectors to get my car to run right. Try these.
3.825
3.39
2.31
1.5
1.05
0.69
0.45
Even with the stock start up tables it ran really good. With the start up tables fix with gregs advice it starts super!