Results 1 to 9 of 9

Thread: water temps

  1. #1
    the BOSS of jellow supporter
    Join Date
    Sep 2010
    Owner Since
    May 2005

    Location
    Dairyland
    Posts
    408
    Thanks
    337
    Thanked 52 Times in 30 Posts

    water temps

    I have an aftermarket coolant temp gauge. its located where stock gauge was in (sensor). when starting the engine when its cold, gauge slowly goes up. so while logger shows 180F, gauge is only at 120F or so, after a while it reaches 160-180F eventually. is this normal? where does ecu/logger get its signal?

  2. #2
    Better than that "other" place Not Verified
    Join Date
    Sep 2010
    Owner Since

    Location
    Cazenovia, NY
    Posts
    525
    Thanks
    0
    Thanked 32 Times in 14 Posts
    The PCM gets its signal from the temp sensor right next to the gauge sensor. 120 on the gauge while the logger is at 180 is pretty bad. I suppose if it's fine when it heats up then I wouldn't worry too much about it.

    Vacuum reduction, Powdercoated misc, cruise relocate, Evo9 BOV, Custom catch cans, Russell fuel filter, SS braided fuel lines, High flow fuel loop, Autogage fuel gauge, Catless DP, DNP Y-pipe, Fuel pump hotwire.

  3. #3
    No sheep are safe tonight supporter
    Join Date
    Sep 2010
    Owner Since
    2003

    Location
    Dandridge, TN
    Posts
    268
    Thanks
    61
    Thanked 137 Times in 100 Posts
    Did you use some sort of adaptor to mount the gauge sensor? Maybe the sensor is too shrouded?

  4. #4
    Never finishes any verified

    Join Date
    Sep 2010
    Owner Since
    2001

    Location
    Wake Forest, NC
    Posts
    2,518
    Thanks
    51
    Thanked 197 Times in 140 Posts
    What logger are you using??

    I have the same issue. My aftermarket gauge will say 180-190 but MMCD will say 210-220. All my sensors are brand new so I am thinking it is either how the ECU it determining the signal or that MMCD is not converting it correctly.

    I am trusting the gauge as the fans kick on at 195 which is where it is supposed to, So my guess is that MMCD is not reporting the temps correct

    Check it out on Youtube!!


    93 Stealth TT - The Stealth Project

    Renegade Tech Works ECS Controller on Intrax Springs
    Chrome ECU
    Hybrid 13g's
    EVO 560cc Injectors
    Spec Stage 3 clutch
    Ninja Performance Output shaft & Input spool
    Ninja Performance Solid Tensioner & Gates racing T-Belt
    CX Racing Dual Core FMIC
    Megan SS Exhaust
    Fidanza Cam Gears and Clear Covers
    3rd Gen Lifters
    HKS BOV
    K&N FIPK
    Maximal High flow converter
    Walbro FP & FuelLab FPR
    Maximal and Seattle Solid Mounts
    All -6an Lines
    Custom -6AN coolant neck lines
    AWS/ABS/Cruise Delete
    MP Rear Control Arms
    SS Brake Lines
    99 Front Conversion
    2nd gen Rear Bumper
    99 Combat Wing
    Complete interior LED Swap
    Skillard Fuel channel
    Oohnoo FPR Bracket
    .
    .
    More to Come......

  5. #5
    Forum User Not Verified
    Join Date
    Sep 2010
    Owner Since

    Location
    Easton
    Posts
    340
    Thanks
    15
    Thanked 8 Times in 8 Posts
    My coolant temp gauge is about 10 degrees off until the car is fully warm, then it reads right on with the scanmaster. I think the reason is because the adapter to screw the probe into the stock hole pretty much covers the whole temp probe. The ecu temp probe is right in the coolant stream while the gauge probe is doesnt even reach the housing through the adapter.

  6. #6
    Twin Turbo verified
    Join Date
    Sep 2010
    Owner Since
    2007

    Location
    Melbourne, Australia
    Posts
    2,123
    Thanks
    76
    Thanked 91 Times in 75 Posts
    do the gauge and the logger both show the same temp when cold? when setting up my Vi-PEC EMS I had to find the correct sensor type. I was able to do this by matching the intake air temp and coolant temp temperatures whe nthe car was completely cold. I know 100% what type the IAT sensor was so I then just changed the coolant sensor type till the both matched.
    Does the MMC program have an option to choose a brand/type of sensor? If no then one of them could be faulty if they don't match.
    1990 JDM GTO TT with Vi-PEC plug-in V44 EMS, TD04-13T's, 3SX Downpipe, MP Hi-flow cat, ARC SMIC's, Aeromotive Stealth 340LPH pump, Fuelab 515 FPR, Ninja Performance 75amp hotwire kit, oohnoo fuel loop & rail adapters, Nylon braided ethanol fuel line, NGK AFX Wideband, K&N FIPK, Iridium plugs, HKS Twin Power DLI, Turbo XS racing BOV, 3SX poly mounts, Custom 280km/h speedo.

    Waiting install
    Injector Dynamics 725cc Injectors.

    Build Thread

  7. #7
    the BOSS of jellow supporter
    Join Date
    Sep 2010
    Owner Since
    May 2005

    Location
    Dairyland
    Posts
    408
    Thanks
    337
    Thanked 52 Times in 30 Posts
    I'm not using any adapters. when warmed up, both show 180F, never went over 185F yet. but I did not take the car to the track either. using dsmlogger and mmc.
    I started to think that maybe it because gauge shows temps after the thermostat? like already cooled water. but does not look that way to me, under the hood.

  8. #8
    Forum User Not Verified

    Join Date
    Sep 2010
    Owner Since
    2004

    Location
    Cape Girardeau
    Posts
    4,791
    Thanks
    365
    Thanked 296 Times in 214 Posts
    Greddy sensor screwed into stock location on mine and it moves in lockstep with logger from dead cold.

    Sent from my DROIDX using Tapatalk

    Parting 6 speed
    Pampena 3.5 Stroker, GTX 2867 Gen IIs, AEM Series2, oohnoo SMIC, DN Hardpipes, FIC 1650s, Walbro 525, aermotive fpr, Dejon intake pipes, Tial Q, Koyo Rad, Samco Hoses, Stoptech 332mm fronts, HKS GT4 Coilovers, Spec 4+ LW, JDM 6 Speed, Billet shift forks, Pampena brace

  9. #9
    Thermal Engineer- Mmbr Since:8/2005 verified
    Join Date
    Sep 2010
    Owner Since
    6/2005

    Location
    Ann Arbor, MI
    Posts
    730
    Thanks
    277
    Thanked 128 Times in 98 Posts
    Is one sensor reading top tank and the other sensor reading bottom tank?

    Hysteresis?

    '92 3000GT Base ATX converted to MTX - Parted Out
    '91 Stealth ES MTX - Fastest NA FWD at NG11 Drags - SOLD
    '91 Stealth RT/TT Check out my blog
    '10 Jetta TDI MTX - 6 speed: 50MPG Highway
    Rest In Peace, My Brother SGT. R. Evans Taylor: Apr 23 '83 - Oct 14 '11

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
The 3000GT/Stealth/GTO Web History Project
3000gt.com
3000GT / Stealth International WWWboard Archive
Jim's (RED3KGT) Reststop
3000GT/Stealth/GTO Information and Resources
Team 3S
3000GT / Stealth / GTO Information
daveblack.net
3000GT/Stealth/GTO Clubs and Groups
Michigan 3S
MInnesota 3S
Wisconsin 3S
Iowa, Nebraska, Kansas 3S
North California 3000GT/Stealth
United Society of 3S Owners
3000GT/Stealth/GTO Forums
3000GT/Stealth International
3000GT/Stealth/GTO Event Pages
3S National Gathering
East Coast Gathering
Upper Mid-West Gathering
Blue Ridge Gathering