preliminary single turbo results

**Gene** · 09-17-2010, 06:26 AM

hey guys, finally got the single turbo car running, spent about an hr dialing in the tune somewhat to make a baseline pull.
mods:
GP 6765 billet single turbo kit with .82 AR,
PTE 46mm gate
tial bov
3" exhaust
GP vertical flow FMIC
BONE STOCK motor never opened
GP driver side intake manifold with Q45 TB
PTE 1000cc injectors
GP 12gal fuel cell
twin bosch 044 pumps
aeromotive regulator@43psi base
AEM EMS 3.5 bar map/iat

using the virtual dyno software that trevor was using. the tune is far from perfect still but its a good baseline

**green-lantern** · 09-17-2010, 08:03 AM

Very cool Gene! I Look forward to updates.

**11secondFWD** · 09-17-2010, 08:08 AM

Pics of car and setup?

**Kibwe Walker** · 09-17-2010, 11:25 AM

Couple of things

1 how much boost was that run?

2 was that done on a 3rd gear pull in a 6 spd?

**Atrosity** · 09-17-2010, 11:31 AM

The graphs say in first post

6 speed 3rd gear
16psi

**B-Man** · 09-17-2010, 11:49 AM

As much as I want to run a single, that curve deters me.

What's with that dip in AFR at 4k rpm?

**Gene** · 09-17-2010, 03:12 PM

Originally Posted by B-Man

As much as I want to run a single, that curve deters me.

What's with that dip in AFR at 4k rpm?

again, i barely spent any time tuning it, especially the spoolup area, so there is lots to be gained there.
also, the turbo is capable of 800whp, it wont have full boost at 2500 rpm no matter how you tune it :P but that said once i get some more tuning done the spool should improve.