Results 1 to 10 of 24

Thread: need expert help on overheating

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #21
    are u sure u dont have any leaks? around the cross over pipe o rings? i remember having a similar issue until i replaced the cross over pipe O-rings.. Coolant would get stock between the heads.. so i never was able too see the leak until I got cross over pipe O rings replaced.

    Make sure you are using coolant and not water.

    those o-rings get them from mitsubishi dealer. they are like $10. dont get them from 3sx or autozone.. get them from the dealer!...those sre the right thickness.
    Last edited by surfersamu; 11-20-2013 at 07:31 AM.
    2013 Yamaha R1
    2003 Honda CBR600RR
    Evo X 2008

    Blue 1995 3000GT NA

    *Performance: Test pipe, OBX headers, Custom Single Exhaust, TT Plenum, TT fuel pump, 272/272 cams, VR4 2nd gen heads, 3rd gen lifters, Under drive pulley, Slotted Drilled Rotors, Rear and front solid motor mount, Intake 11.5inch Spectre air filter.
    *Weight: 2930lb
    *Electronics: AEM UEGO wideband, Evoscan, 99 Flashable ECU, Tactrix 2.0.
    WHP~231 WTQ~207 VDR Dyno http://i70.photobucket.com/albums/i1...ps03a88b79.jpg

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
The 3000GT/Stealth/GTO Web History Project
3000gt.com
3000GT / Stealth International WWWboard Archive
Jim's (RED3KGT) Reststop
3000GT/Stealth/GTO Information and Resources
Team 3S
3000GT / Stealth / GTO Information
daveblack.net
3000GT/Stealth/GTO Clubs and Groups
Michigan 3S
MInnesota 3S
Wisconsin 3S
Iowa, Nebraska, Kansas 3S
North California 3000GT/Stealth
United Society of 3S Owners
3000GT/Stealth/GTO Forums
3000GT/Stealth International
3000GT/Stealth/GTO Event Pages
3S National Gathering
East Coast Gathering
Upper Mid-West Gathering
Blue Ridge Gathering