Thanks Antero, I've ordered parts for two amplifiers.
Thanks Antero, I've ordered parts for two amplifiers.
I ordered this Snow performance kit today, it should be here within a day or two:
https://www.snowperformance.eu/en/wa...1#&gid=1&pid=1
My little borther is going to help me with the MOSFET controller in the mean time. He had an alternative approach he wanted to try based on a FQP50N06 TO-220 and a TC4427AEPA. Thats just numbers to me but we'll see how it turns out.
The FQP50N06 requires 10volts to turn on, it won't power on from the LCDBC 5v signal.
The TC4427AEPA current rating is too low.
Of course, I don't know what he had in mind, maybe he was going to run them in stages or something.
I got all the parts for the water methanol injection now and the driver module seems to be working. I posted a short video of the setup in my build thread here:
http://www.3sgto.org/threads/10823-S...832#post336832
Found out by testing that a PWM frequency of 100 hz seemed to work best with the Aquatec 5800 pump that came with the kit. Anything higher or lower gave suboptimal atomization a low duty cycles.
Is there a way to enable the current Alchy functionality in the 3.57 firmware or does it require a reflash with a special firmware?
|
3000gt.com 3000GT / Stealth International WWWboard Archive Jim's (RED3KGT) Reststop |
|
Team 3S 3000GT / Stealth / GTO Information daveblack.net |
|
Michigan 3S MInnesota 3S Wisconsin 3S Iowa, Nebraska, Kansas 3S |
North California 3000GT/Stealth United Society of 3S Owners 3000GT/Stealth/GTO Forums 3000GT/Stealth International |
|
3S National Gathering East Coast Gathering Upper Mid-West Gathering Blue Ridge Gathering |
Bookmarks