Injector resistor pack removal

[GTOJOE]

Strange that asa showed it. Anyway it would be almost directly in front of the driver on the firewall. The plug is a large square plug with 7 or 8 pins. I doubt it's there though. Unless it's there and they put a blanking plug over it that bridged all the pins. Basically a single power wire goes to the resistor then through the resistor it branches off to all 6 injectors. In theory your car would have a junction somewhere that sends power to all injectors. Find that junction and wire in the tt resistor.

Sent from my GT-I9300 using Tapatalk 2

[ilian51378]

Strange that asa showed it. Anyway it would be almost directly in front of the driver on the firewall. The plug is a large square plug with 7 or 8 pins. I doubt it's there though. Unless it's there and they put a blanking plug over it that bridged all the pins. Basically a single power wire goes to the resistor then through the resistor it branches off to all 6 injectors. In theory your car would have a junction somewhere that sends power to all injectors. Find that junction and wire in the tt resistor.

Sent from my GT-I9300 using Tapatalk 2

I wonder if it could have been there, but was removed at some point. There was something on the fire wall that I removed, but it was not a resistor pack. I will look more closely tomorrow in daylight.