Armory Thread

[wingnut]

Where all did you get your stuff? I'm interested in doing this also. I assume you are loading 7.62x39?

honestly, right now you gotta hit small town gun shops...

found the primers in idaho, the powder in washington and bullets online. my job travels, so its a bit easier for me, lol.

...and you're close in caliber, those are 6.8SPC.



left is an 7.62x39, middle is 6.8SPC, and right is 5.56

[onebadmollafolla]

ABC, no less.

LiveLeak.com - Gun Myths Gone in Five Minutes: ABC News 20/20

[IPD]

1 <3 5.56 NATO.

on another note, someday i'm going to talk the guys at the range into letting me practice on the 4.6x30.

[Desperado]

https://www.facebook.com/photo.php?v...type=2&theater
https://www.facebook.com/photo.php?v...type=2&theater

A little windy but still a blast

[nodoze]

Got error messages for both

Sent from my HTC Hero S using Tapatalk 2

[Vantage]

Same.

[wingnut]

1 <3 5.56 NATO.

on another note, someday i'm going to talk the guys at the range into letting me practice on the 4.6x30.

kind of an oddball round, but it reminds me of an article i just read, on a 7.62x40...

...they basically stretch a 5.56 case to accept a 7.62 bullet!

[onebadmollafolla]

kind of an oddball round, but it reminds me of an article i just read, on a 7.62x40...

...they basically stretch a 5.56 case to accept a 7.62 bullet!

Wouldn't it be 7.62x45 then?

[wingnut]

Wouldn't it be 7.62x45 then?

Nah, you lose 5 from the trimming of the narrow end of the 5.56 case...

The 7.62x40 WT is based on the inexpensive and readily available 5.56x45 Nato cartridge case. The 5.56 case is shortened to 1.560” and then re-sized (single operation) in a standard 7.62x40 WT sizing die which results in a formed 7.62x40 WT case with a finished overall case length of 1.565”. The cartridge is designed for 110-150gr .308” diameter bullets loaded to supersonic velocities, but if chambered in a 1-8 twist barrel is also suitable for heavy bullet subsonic use also. Click here to download the Cartridge Case Spec Sheet.

...may sound odd, but the idea is 7.62 rounds in 5.56 mags

[IPD]

but the 4.6 isn't a shoehorned round. it was specifically made for the mp7. and the smaller size means less muzzle lift, meaning more bullets hit the target. that...and it's amazingly effective on body armor.