Page 1 of 8 123 ... LastLast
Results 1 to 10 of 71

Thread: My setup, need suggestions and help .

  1. #1
    Forum User Feedback Score 0
    Join Date
    Sep 2010
    Owner Since
    2000

    Posts
    1,244
    Blog Entries
    2
    Thanks
    215
    Thanked 91 Times in 64 Posts

    My setup, need suggestions and help .

    This is the HU.
    Infill G4 Double-DIN Car-PC Barebone (1.5Ghz, FM radio, Amplifier, GPS)


    I bought it because I just wanted to upgrade the OEM HU and for On board datalogging electric dash and all the other features that on board computer offers. Well ofcourse it didnt work like I planned the problem is this really annoying static noise problem and the only solution is to use the optical output.


    I´m having a really hard time finding an EQ for this setup that would accept optical in (toslink) (2 channel PCM) .
    (fixed) no longer a problem i can use the rca outputs too

    And then there is the other issue I would like to have functional rear speakers too.
    ill mount the woofers in the rear 6x9 location

    And then there is the third problem if I use the optical output I need something to control the volume because the volume buttons on the Hu no longer works=(fixed) no longer a problem
    Last edited by mb7050; 02-19-2012 at 04:44 PM.

  2. #2
    Monogamous Gigolo verified Feedback Score 8 (100%) 2fnloud's Avatar
    Join Date
    Sep 2010
    Owner Since
    October 2009

    Location
    Ithaca, Mi.
    Posts
    2,799
    Blog Entries
    3
    Thanks
    618
    Thanked 192 Times in 133 Posts
    Quote Originally Posted by mb7050 View Post
    This is the HU.
    Infill G4 Double-DIN Car-PC Barebone (1.5Ghz, FM radio, Amplifier, GPS)


    I bought it because I just wanted to upgrade the OEM HU and for On board datalogging electric dash and all the other features that on board computer offers. Well ofcourse it didnt work like I planned the problem is this really annoying static sound problem and the only solution is to use the optical output.


    I´m having a really hard time finding an EQ for this setup that would accept optical in (toslink) (2 channel PCM) .

    And then there is the other issue I would like to have functional rear speakers too.

    And then there is the third problem if use the optical output I need something to control the volume because the volume buttons on the Hu no londer works
    OK with that added fact, I have nothing.

  3. #3
    Forum User Feedback Score 0
    Join Date
    Sep 2010
    Owner Since
    2000

    Posts
    1,244
    Blog Entries
    2
    Thanks
    215
    Thanked 91 Times in 64 Posts
    Here is it installed, just needs a little refining/ aligning

    dust dust dust

    yep I also need a new cigarette lighter cover


    The HU got a touchscreen but I also bought this Logitech keyboard its wireless, two strong magnet holds it over the black suede piece I made for it, magnets are also there to guide it in the right position .
    Last edited by mb7050; 06-27-2011 at 03:56 PM.

  4. #4
    Forum User Feedback Score 0
    Join Date
    Sep 2010
    Owner Since
    2000

    Posts
    1,244
    Blog Entries
    2
    Thanks
    215
    Thanked 91 Times in 64 Posts
    I found this EQ



    Audison - Music Expression

  5. #5
    Monogamous Gigolo verified Feedback Score 8 (100%) 2fnloud's Avatar
    Join Date
    Sep 2010
    Owner Since
    October 2009

    Location
    Ithaca, Mi.
    Posts
    2,799
    Blog Entries
    3
    Thanks
    618
    Thanked 192 Times in 133 Posts
    I knew about the bit one but didn't know about it having the digi input...reading manual now

  6. #6
    Monogamous Gigolo verified Feedback Score 8 (100%) 2fnloud's Avatar
    Join Date
    Sep 2010
    Owner Since
    October 2009

    Location
    Ithaca, Mi.
    Posts
    2,799
    Blog Entries
    3
    Thanks
    618
    Thanked 192 Times in 133 Posts
    If you have a classy place to install the remote interface....THAT is your best option.

  7. #7
    Forum User Feedback Score 0
    Join Date
    Sep 2010
    Owner Since
    2000

    Posts
    1,244
    Blog Entries
    2
    Thanks
    215
    Thanked 91 Times in 64 Posts
    it says It can reconstruct a stereo signal from a multi-channel signal. In addition it can reconstruct
    reconstruction a centre channel and subwoofer channels from a stereo input alone.

    I wonder if it can reconstruct a 4 channel signal from PCM 2channel opt input. so many output channels for me I´m going to upgrade the speakers too but only using the OEM locations . Any recommendations for speakers, amps..
    Last edited by mb7050; 06-27-2011 at 02:34 PM.

  8. #8
    Monogamous Gigolo verified Feedback Score 8 (100%) 2fnloud's Avatar
    Join Date
    Sep 2010
    Owner Since
    October 2009

    Location
    Ithaca, Mi.
    Posts
    2,799
    Blog Entries
    3
    Thanks
    618
    Thanked 192 Times in 133 Posts
    might as well stick with Audison products...I like matching brands.

  9. #9
    Forum User Feedback Score 0
    Join Date
    Sep 2010
    Owner Since
    2000

    Posts
    1,244
    Blog Entries
    2
    Thanks
    215
    Thanked 91 Times in 64 Posts
    Quote Originally Posted by 2fnloud View Post
    If you have a classy place to install the remote interface....THAT is your best option.
    I´m trying to find the dimensions for the remote interface but with no luck

  10. #10
    Monogamous Gigolo verified Feedback Score 8 (100%) 2fnloud's Avatar
    Join Date
    Sep 2010
    Owner Since
    October 2009

    Location
    Ithaca, Mi.
    Posts
    2,799
    Blog Entries
    3
    Thanks
    618
    Thanked 192 Times in 133 Posts
    on page 4 of the owners manual

    43.5 mm tall
    17mm thick (23mm thick accounting for dial on the unit)
    For the width I can only see the width of the bracket, if you assume that the remote width is the same it is 90mm. even if it is not it wouldn't be that much bigger than that.

    Hope that helps

  11. The Following User Says Thank You to 2fnloud For This Useful Post:


Page 1 of 8 123 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
The 3000GT/Stealth/GTO Web History Project
3000gt.com
3000GT / Stealth International WWWboard Archive
Jim's (RED3KGT) Reststop
3000GT/Stealth/GTO Information and Resources
Team 3S
3000GT / Stealth / GTO Information
daveblack.net
3000GT/Stealth/GTO Clubs and Groups
Michigan 3S
MInnesota 3S
Wisconsin 3S
Iowa, Nebraska, Kansas 3S
North California 3000GT/Stealth
United Society of 3S Owners
3000GT/Stealth/GTO Forums
3000GT/Stealth International
3000GT/Stealth/GTO Event Pages
3S National Gathering
East Coast Gathering
Upper Mid-West Gathering
Blue Ridge Gathering