My setup, need suggestions and help .

[95 RT/TT]

I ran them off the car with the suplied passive crossovers and powered them with some old blaupunkt 4x75wrms amp (2x75wrms in this case) . the box i used was sealed .

the specs for the

6.5" midbasses 90wrms 2.83V,1m 92 dB 60-20khz 37mm voice coil

1" tweeter 2" mid thing 50wrms 2.83V,1m 90 dB 500Hz -22khz 25mm voice coil

did some testing with the multimeter
6.5"

2" mid

6.5" midbass dissconnected no reading ! its weird because impedance should be 2ohm they sell these like this with this passive crossover without the midbass element as a "2" coaxial element"

Is that some new fangled impedance meter?