My setup, need suggestions and help .

[MR2]

Bah, If it's the last thing I ever do on the GTO, it will be to figure out how to seal some door pods AND allow the class to lower properly.

[95 RT/TT]

The doors were done in and out with vblock and there's dampening pads for the speakers. There is also a cascade rattle foam under the wires and door rods.

The silver speaker is 6.5" the 7" speaker is the black

Yes that is a black door door panel.

[mb7050]

fuck the glass. that should do it.

oh and seal

I obviously didn't make myself clear enough so let me specify

[reallyxxxxxxloud]

hmmm. I wonder would these fit ?

Usher 8945A 7" Carbon Fiber/Paper Woofer
My friend got these installed and god damn they sound amazing.

Wow nice tear in the cone....

[MR2]

Low Profile Subwoofers

Make a great woofer in a door I recon just run it up to 800 and do a mid from there etc

[mb7050]

[mb7050]

Wow nice tear in the cone....

what would you suggest in the 7" range . I would think uneven core would cause uneven mass on the cone and thats a bad thing right ?

[2fnloud]

There is nothing wrong with that brand / model of speaker. He is pointing out that it appears that the photo you posted has a tear in the cone, like it was cut or ripped by slamming into something.

[mb7050]

saving some links for future use
JBL MS-8 System Integration Digital Sound Processor

Arc Audio KS 125.4 Mini

http://www.parts-express.com/pe/show...umber=264-1046

http://www.ebay.com/itm/PC2-65C-PREC...184#vi-content

[2fnloud]

If you can make that fit in the places that we talked about in CHAT BOX, THAT would be a very advanced system, no need for passive x-overs, let the MS-8 do that. Hope you can get all that stuff to fit.