Datalogging Hybrid ECU

[VR-4 0wnz j00]

What is currently the best datalogger for hybrid ECU's? I want to get one but Im not sure which offers the best features or even which ones are still around. I know Mirage is gone.

[dpartinvr4]

I have Hand Held Halo and it does the job very well. It has quite a few open ports for extra inputs, and has a very active support forum if you ever have an issue.

[aaronatstate]

Evo Scan.

[mb7050]

Evo scan works very well with the hybrid ecu

[VR-4 0wnz j00]

Alright, so if I do Evo scan, all I need is this cable EvoScan 1.3D USB OBDII/MUTIII/SSMII Datalogging Cable and the software?

[VR-4 0wnz j00]

Can you verify that's the right cable so I can buy it?

[Jimvr4]

I think that will work but you need to have Pin 1 grounded. You may need to swap pins 1 and 15 on the car side grey connector so the cable can control pin 1 (this functions like a controllable ground).

[dbest671]

I had both the HHH and Mirage Hybrid logger. When I sold the 94, I included the Mirage cable. The HHH is very user friendly, which is why I opted to keep that one.

Can't speak for EvoScan.

[MR2]

+1 for HHH, very easy to arrange all the graphs to workout what's happening

[TurboX2]

Alright, so if I do Evo scan, all I need is this cable EvoScan 1.3D USB OBDII/MUTIII/SSMII Datalogging Cable and the software?

I have a 94 Stealth TT, and ironically just tonight I busted out that cable, Evo Scan 2.6 (they have 2.8, but I just use 2.6 b/c that's the version I bought a while ago), and adjust a few settings on it like so:

EvoScan (2.6+ Basic Settings for a 94-95 3S)


and then you'll be good! I know the lack of "finite" information stinks for 94-95 3s. Also, I'm running this on a Windows 7 x64 Laptop!