Post a recent picture of your car

**2fnloud** · 05-09-2013, 06:55 AM

Originally Posted by boosted3s

Nope, I just don't think lowering springs make any 3S low enough. It's all subjective though, to each his own.

You obviously do not track or auto-X the car. I would be surprised if you already have the control arms in the following angle / vs -- or \ Obviously those are exaggerations but still during normal driving the suspension should never be /

Might as well put a 205 on your rims too.

**Blackmount** · 05-09-2013, 07:20 AM

Originally Posted by Unlogic

love the wheels, what kind are they? size? offset?

**Snook** · 05-09-2013, 08:51 AM

They look like p45rs

Sent from my HTC One VX using Tapatalk 2

**Unknownvr4** · 05-09-2013, 01:16 PM

His car is not low enough until he has a finger space between the tire and fender. I have a 245 tire and adjustable upper control arms

**2fnloud** · 05-09-2013, 01:24 PM

I can not do that with 10" wide wheels and 275's. Do you have ANY suspension travel left?

**Unknownvr4** · 05-09-2013, 01:53 PM

Yes, my suspension travels fine, does not rub or bottom out and my wheels are 9 or 9.5 wide

**Unlogic** · 05-09-2013, 04:04 PM

Originally Posted by Blackmount

love the wheels, what kind are they? size? offset?

Snook is right, the wheels are just simple Rota GTR/P45 18x8.5 ET35. Cheap, good looking and a lot easier to keep clean compared to my old OZ Futura wheels.

**Blackmount** · 05-09-2013, 04:38 PM

Originally Posted by 2fnloud

I can not do that with 10" wide wheels and 275's. Do you have ANY suspension travel left?

People do it all the time.... by setting their dampening force on their coilovers retarded stiff.

Definetly not a functional setup same goes for streched tires