My LCD screen project, boost, WBO2, Knock, etc

[BlackStealth]

Yes I forgot other benefits is more stable connection for 94-99 ECUs because it uses a crystal for precise timing (no more Calibration required). Boost control is unaffected. $20 shipped to USA ,yes. I will send it via bubble envelope (CanadaPost to US Postal). The micro will be in a plastic shell to protect pins from bending during transport.
Paypal: antero_jussila@yahoo.com

[NickS VR4]

Just paypal'd PMing you address

[TurboSinceBirth]

Firmware 3.0 is out, but this is only for those with the newer 16/20mhz microprocessor ($20 shipping included). (1) Datalogging speed has been enhanced greatly:

8Mhz processor before: 100 frames/sec on Evoscan v2.6 and 99 ECU.
20Mhz processor after: 278 frames/sec.

(2) Knock and Coolant temperature alerts now use two readings (to avoid false-positive).
(3) New: ECU Load vs Dutycycle table.

I had to think for a sec which processor I had since I knew I upgraded it once but it's the 16mhz microprocessor. I haven't had any time to test out the ecu load vs dutycycle table. I did get your e-mail awhile ago Antero but haven't really touched my car much since the body damage late Sept. I still need to check my grounds.

[Snook]

I wish I was around in time to get this

[BlackStealth]

I wish I was around in time to get this

I have a couple LCDBC units still available, send me private message.

[BlackStealth]

I had to think for a sec which processor I had since I knew I upgraded it once but it's the 16mhz microprocessor. I haven't had any time to test out the ecu load vs dutycycle table. I did get your e-mail awhile ago Antero but haven't really touched my car much since the body damage late Sept. I still need to check my grounds.

Well the good news is Jester will be testing out the noise-filtered OBD2/MUT cables and let me know which version works best.

[Snook]

I have a couple LCDBC units still available, send me private message.

PM sent

[Assy]

Firmware 3.0 is out, but this is only for those with the newer 16/20mhz microprocessor ($20 shipping included). (1) Datalogging speed has been enhanced greatly:

8Mhz processor before: 100 frames/sec on Evoscan v2.6 and 99 ECU.
20Mhz processor after: 278 frames/sec.

(2) Knock and Coolant temperature alerts now use two readings (to avoid false-positive).
(3) New: ECU Load vs Dutycycle table.

What fo u mean by false positive? Like getting knock alerts with no knock presant?

[Rebel]

Finally got around to putting mine in! Best mod ever! lol. I sat there for 15 min just staring at it cuz it's so awesome lol. How do we know if we have version 2 small or big memory micro?

[Snook]

Still waiting on funding to buy this.