My LCD screen project, boost, WBO2, Knock, etc

[TonyM]

Man this thing is cool. May need to go on my to do list for the summer . . .

[Goallie11]

I took another pic for you guys so you can see it with the bezel put back on.

[CoopKill]

Can I ask if there is something in the way to prevent centering the gauge with the rpm writing?

I want this as well, but am doing other more important things and want to wait for logging output capabilities...

[Goallie11]

You could move it over a little more, but the actual screen is bigger then the bit you can see, the electronics of it that is.

Sidenote: Antero I think you should make a little positioning template so the screen can be properly aligned instead of having to measure a whole bunch and still miss. (Like I did, but not by a noticeable amount.)

[BlackStealth]

There's a piece of clear plastic in the way that would have to be grinded down or cut to center it properly. This clear plastic is responsible for distributing the light evenly. I did have it centered on my first attempt, but it takes more effort to do that. On my second attempt I got lazy and left the clear plastic alone, which is why it's not centered. So yes, it can be done, but more work.

[92pearltt]

this has got to be one of the best things made for our cars.

[tabasco122]

subscribed. curious to see if this will work on other obd1 cars.

[vr4tune]

Any news for aem users yet? Your killing me! Please integrate with aem ems!

[BlackStealth]

The OBD1 I implemented is "Mitsubishi OBD1" such as Stealth/3000GT/Talon/Eclipse/Laser/Galant/etc. Other OBD1 can only be added in if I had documentation for it.

AEM EMS - Same thing, need documentation. I made a serial port sniffer, just need an AEM EMS to play with.

[green-lantern]

Can I ask if there is something in the way to prevent centering the gauge with the rpm writing?

I want this as well, but am doing other more important things and want to wait for logging output capabilities...

You have to cut the clear plastic piece in back. Here is mine