My LCD screen project, boost, WBO2, Knock, etc

[JFC3000GT]

Quick question...Can I flash the LCDBC AEM v4.00 Firmware to the 2020 version with the OLED screen. Will it work? I only found a flash for the OLED for the LCDBC+Addon.

[BlackStealth]

I haven't released any OLED versions yet for the "AEM type software". Which OLED screen size do you have? 4x20 or 2x16?

[JFC3000GT]

I haven't released any OLED versions yet for the "AEM type software". Which OLED screen size do you have? 4x20 or 2x16?

I have the 4x20 version

[BlackStealth]

A few weeks ago I started working on the 2x16 OLED/AEM version -- I'll finish that project and then convert it for 4x20 OLED.

[BlackStealth]

Those that are running AEM ECUs and want to use OLED display on their units, both 4x20 and 2x16 is supported.
http://lcdbc.xp3.biz/updates/AEMUpdate401.zip

[JFC3000GT]

Those that are running AEM ECUs and want to use OLED display on their units, both 4x20 and 2x16 is supported.
http://lcdbc.xp3.biz/updates/AEMUpdate401.zip

Thank you for the Update!! Works great!

[BlackStealth]

Thank you for the Update!! Works great!

Glad to hear that. When switching over to "AEM version", you will need to go to config menu and look for "Reset Customs Y/N". This will get rid of all the funny characters, and replace them with the word Custom001, Custom002, etc.

[BlackStealth]

Anyone with older LCDBC (version 3.0 or higher firmware) can now swap out their LCD screen for newer technology such as an OLED screen. These displays have fast screen refresh even during cold weather operation. Also it now uses 4 wires instead of 12 wires, making installation a little easier / lighter.



All purchase inquiries should be sent this thread here:
https://www.3sgto.org/threads/17430-...-time-ECU-data