Recommend an oil cooler or way to adapt stock cooler to 10AN fittings.

[Gearheadvr4]

Please help me pick an oil cooler kit or find a way to adapt our stock cooler to AN10 fittings. I'm having a plate made that will bolt up to my 3.5L to relocate the oil filter housing. It will not fit in the stock location.

Not sure what a oil cooler setup should cost but I'd like to stay around $150 to $200 if possible. Even if that means putting a kit together myself from different sources.

[Chatzvr4]

no problem we have several sizes available for 10an if you need just the oil cooler you are looking about 125.00 shipped

[Gearheadvr4]

What are your options? Do you have lines that will fit?

I checked out the website and didn't see any oil coolers listed.