belt size?

[dsmnoob91]

i was wondering if anyone knows what size belt i would use if i took my ac compressor out or part# would be nice...?

[mb3000]

Gates/Napa/Carquest #060390 might work, not 100% sure though.

[n2nsanity]

u can also use the # of ribs and diameter of belt
or take the old one in

or are you talking about doing an ac delete?

[KeithMac]

I removed the idler and tensioner pulleys, notched the alternator bracket slightly to clear the belt run ans used a 6pk1000 belt on my 1st gen GTO TT.

[dsmnoob91]

ac delete

[mb3000]

Belt Dayco 3S DOHC Alt/AC Stock Size - ONLY for AC Elimination AC Delete Belt Delete*-*Mitsubishi 3000GT*/*Dodge Stealth Parts

[dsmnoob91]

oh alright thank you

[n2nsanity]

also, as i was saying earlier, all you should need is the # ribs and diameter
should be able to get the belt you need at your local autostore for less than $20
i've been buying almost everything from advance for the past year or so
buying online i manage to get somewhere between 30% to 40% off of every purchase

any mentioned #s won't be right if you don't have a stock size crank pulley
to get the diameter you can take a string or small rope or whatever and route it around the pulleys, then measure the string
do this with the tensioner pulley adjusted all the way up and again with it all the way down
2 different #s, one probably 37ish and the other probably 39ish
somewhere in the middle is the size belt you want