Exhaust Help

[locplayer1]

Hey I have been having some issues with the mesh on my down pipe. I have a 3sx down pipe and have had the mesh rip on it then replaced it and it sounds like it is doing it again. Would like to do just a steal pipe but don't really want to do solid motor mounts. Anyone have this problem or know how to fix it?

[1gRick]

Check your mm. If they are ok then use a longer piece of mesh. Many of these have rediculously short pieces. Any decent muff shop can do it.

[locplayer1]

Yeah the piece that is bad now is about 6 inches long I believe any other ideas?

[CoopKill]

Motor mounts... Replace them and problem solved.

[IPD]

coop is right. even stock-style new rubber mounts will do the trick.

[Chris GTO TT]

Agreed stop the motor from moving that's what is causing too much stress on the flex section.

[locplayer1]

Cool thanks guys I am thinking about picking up some solid motor mounts the have a set on 3sx that pretty good price any ideas on this or know where I can get some cheaper ones?

[stealthee]

Buy them directly from Maximal Performance. You'll likely get a better price from the source.

[MADMarc]

Yeeeap, definitely happens when the mounts are letting the motor move around too much. You've got Terry's over at Maximal Performance and I also believe Split Second Motorsports (both in sponsor's section) sells them as well.

[Chris GTO TT]

I've got the harder poly mounts and they transmit plenty of vibrations I'd be hesitant to get solids....that's just me though