Opening day at drag strip for DSM

[11secondFWD]

Well I was very very happy today with the times.

My mods are:
A completely stock longblock. (stock pistons, rods, cams, everything, all oem) I do have balance shafts eliminated and L19 headstuds with an oem composite gasket. The engine is stock but was rebuilt last season.

A completely stock Automatic tranny with the stock stall. All I have is a tranny cooler, extra inline filter, a shift box and full line pressure.

My turbo is the FP68hta 16g, it is an evo3 with a billet wheel
I have a FP race manifold.
A tubular o2 housing with exhaust dumping right out.
A 4 in FP intake pipe and KN filter.
1150cc FIC injectors
2 inlline walbro pumps, -8an feed, -6an return, 5 gallon fuel cell, aeromotive afpr and aeromotive fuel rail.
ECMlink v3, which is awesome and so easy to tune, my afr was 12.1, timing was 23 degrees max at redline. I am running speed density too with the v3. I have my AEM wideband with narrowband simulation.
I have my 24x12x3 ebay intercooler with 3 in pipes that I used on my FWDTT 3S.

My boost was at 30psi. I am on pump e85. I am launching with 25 psi off the line from power braking.

The auto is the bomb! It shift super fast with the shift box and hard. And it launches great, with full boost.

I never thought I would need slicks again, especially with an AWD car. But I was spinning a little, losing traction, and getting a little sideways.

I had 0 degrees of knock and ran 8 runs in like a hour. I had the engine rebuilt by a shop on trade and all the rest I did myself. I did my whole fuel setup, headgasket, head studs, turbo, and ALL the tuning (more less everything else). I spent all winter and I am very happy.

This turbo has such torque and instant spool, I dont know if I want a bigger turbo. 11.1 @122 and instant spool is sweet.

[11secondFWD]

Pics will be here

[11secondFWD]

[11secondFWD]

Against a camaro

[11secondFWD]

[11secondFWD]

The rest of the videos are here YouTube - 94atxvr2's Channel

[Street_Chally73]

Very nice, consistent runs, man!! Congrats on tip-toeing near the 10's with a setup you completely built/tuned!

[19Eclipse90]

Very cool. Best of luck with it at the shootout!

[Bluejediz]

If you dont mind my asking...how much has this setup run you? Been thinking about picking up a first gen DSM since I hear they are cheap to make fast.

[11secondFWD]