What did you do today to your 3/S?

[2fnloud]

I broke my project



Long story short, I was trying to get to my bottle returns for a bottle drive and I knock it down trying to get the bottle container over my finish lumber...it is true, no good dead goes unpunished

Fortunately I used LED's, so I am only mildly set back.

[CoopKill]

AAAaaaaghhhhhhH!

[Street_Chally73]

I got the polished intake plenum in the mail today...It'll need some work, but it looks pretty good overall.


Sent from the garage

[GTOJOE]

Today, I put my daughter in the car for the first time. She is 4, and she loved every second of it. Took it home and washed it, cleaned up the wheels as well as the engine bay.

My son is only 22 months and he loves mine. He's been able to say GTO since about 18 months. He says want to go racing in daddy's GTO my wife told him it has a momo steering wheel so now he points to it and says it's got a momo lol.

Sent from my GT-I9300 using Tapatalk 2

[boosted3s]

Robo modded my headlights and did LED halos

[`Spencer]

Today, After watching a youtube video, I put a new Head-unit in. Took me a bit longer than I thought, but it works correctly and I am happy. After replacing the Sony Xplode one, the bass seems to hit harder and everything sounds overall cleaner.

[sergechronos]

Today I worked on brackets and trying to fill in a bunch of gouges in my front bumper. Couldn't find a swap so looks like I'll be hacking into it for my FMIC, so I want it as good looking as I can. Made some calls and emails to folks to try to get some movement happening on these parts I've purchased that haven't arrived yet.

Been trying to clean the clear cover for my speed and tach cluster. It has some...kind of smear looking thing on it. Tried soap and water, goof off, acetone, pretty much everything you can think of. Finally said to hell with it, trying to wet sand it with like 2000 grit sand paper and polish it. If that doesn't work I'll just buy another cluster.

[Street_Chally73]

Been trying to clean the clear cover for my speed and tach cluster...Finally said to hell with it, trying to wet sand it with like 2000 grit sand paper and polish it. If that doesn't work I'll just buy another cluster.

Make sure to use Autosol & a loosely-sewn buffing wheel. Don't apply too much pressure or else you will end up with a burn spot or worse; a noticeably uneven part...I've done a bunch of my plastic parts with this combo & have had great results.




Sent from the garage

[Primus101]

Autosol is great stuff. I've been using it for aluminum for many years & have done a couple sets of headlight covers that came out great-

[OhioSpyderman]

Installed a 2g Stealth steering wheel in my 92TT

$61 shipped (with airbag and cruise control) off Egay!!!!

Bob.