What did you do today to your 3/S?

[CoopKill]

She does a beautiful job!

Sent from the Man Cave!

*\( ^o^ )/*

[opy01]

I installed my 3sx downpipes, free flow cat, WBo2 and passed a kidney stone. I do not recommend passing a kidney stone though, it's very painful

[Toni]

Wanted to remove two decent sized bugs in my 96 wing only to cut into the pearl fml. Oh well, gonna have to live with this one.

[Bloodlust182]

I fixed my sunroof today. I would recommend to others to replace the hinges on both sides at the same time. Also I ordered the aluminum gears but that wasn't the problem, it was the bottom of the regulator. The threads that hold the gears to the bottom of the regulator was stripped. A new one is $350 so hopefully JB Weld will due for now... unless someone on the forums has one for sale (I haven't looked yet).


Sent from my iPhone using Tapatalk

I can get you the gear assembly that bolts to the car.

[opy01]

I can get you the gear assembly that bolts to the car.

PM'd you. Thanks!


Sent from my iPhone using Tapatalk

[vitalivr4]

Enjoyed of driving it!!!

[sergechronos]

Enjoyed driving it!!!

Yeah, me too..Those jack stands sure do make for smooth driving

I spent about 80 bucks at harbor freight today. Digital caliper (9.99 marked down from 31), new jackstands (on sale for 19.99), HVLP gun (9.99), LVLP (18.99), 51 piece socket set as a spare for my truck since I already keep tools in the 3S lol (was like 12 bucks) and on and on.

Waiting to hear back from the machine shop on the bill, new rings for the pistons and new ARP main studs are on the way then the shop can balance and do everything else.

[sketch]

harbor freight tools as spare "keep in car tools" are awesome tools when on sale.

[Toni]

Made a circuit that works in conjunction with Chrome's check engine knock light. Sounds an alarm when the knock light goes off and WOT. Hid it in the gauge pod with a hole for the sound. It's loud lol.

[sergechronos]

harbor freight tools as spare "keep in car tools" are awesome tools when on sale.

Agreed. Wouldn't be something I'd use all day every day (busted a couple of their sockets before with heavier usage), but for emergency usage on the cheap, they are hard to beat for cheap


Today I did quite a bit stuff, some good and some bad. Did work refurbing a 99 bumper for a TN3S member, had a bad set of dents that I'm trying to get popped out and then sanded and repainted.

Did finish my AN conversion to my waterneck, need to do the lines and stuff once my shortblock is back.

Got the coil overs on at all 4 corners, 3 finger gap in back, no telling how the front will be till I get the drivetrain back together. Did damage the threads on the driver side rear trailing arm though pulling the rear shock..So now I'm going to have to try to fix it or replace it. Going to try just chasing the threads for now and hope I can get the bolt to go in since the vast majority of the threads are still in there and in good shape, just the first 2 or 3 threads are damaged and smashed together.

Drilled the holes on the rear hatch for the hoop spoiler, can't get it to line up quite right and fit evenly. Not sure just yet why it's not quite right, but I'll figure it out.

Also washed it for the first time in forever, and got my fuel sender prototype mostly done. New AN fittings and such are on order for that, hopefully Friday I'll get that and the front part of the cabin sound deadened, but we will see.