whats the 3sgto members whp and mods.

[93SlugTT]

I thought this would be kinda cool. To get a list going of what everyones. Basic mods are and what numbers they are at.

List on mods: turbo, built or stock bottomend and what tuning program.2 or 4 bolt block
Whp numbers
1/4 mile times

I would start but I'm on the project list

I will be running

93 stealth rt/tt
4bolt block, AEM EMS, 15Gs, stock rod,arp main,rod,headstuds, and weisco pistons.
1/4time: n/a
Whp: n/a

Go!




1. 93slugTT: 4bolt,AEM EMS,15g. Wesico pistons, arp rod main, headstuds.
1/4: n/a
Whp: n/a

2.inperfectdarkness: 16g's; 3.5L 6g72 (obviously 4-bolt)--nitrided/cryo-treated crank, billet rods, new pistons; safc2+3.5" GM MAF/MAF-T.
1/4 mile: n/a
whp: n/a

3.YoshiBishi :3sexecutioners at 17psi with supporting mods, stock 92 block, GM Maf(t), and generic downpipe
WHP: Tuned for 380
1/4: No idea

4.Austin@STM:stock motor, 9b's, AEM EMS, E-85, single walbro, FMIC, 550cc injectors, weight reduction stage 5072

1/4 - 10.95 (best e/t, trapped 124 this pass)
MPH- 127 (best mph on a 10.97 pass)
60' - 1.4x (on slicks, 1.6x on snow tires)
WHP- 373 (on mustang dyno @ 21psi)
WTQ- 472



5:skater334:BPU @ 15psi w/ stock everything minus the hood, y-pipe, MBC, Intake cone, turbo timer, suspension, pillar pod w/ afr and boost, ROBO headlights and tail lights, and exhaust w/ gutted pre cats.

HP - N/A (might dyno this year at MOD)
1/4 - N/A
1/8 - 9.24 (slipping clutch on stock ECS w/ intrax springs, OEM y-pipe, and stock hood)
Reaction time - 0.495 (same as 1/8 time above)
60' - 1.87


6. sin's vr4: Rebuilt block bored .060, forged crank, 3sx custom rods, weisco 8.5:1 CR pistons, Forced performance (IPS) 19T's, blow thru dejon twintakes, 780 PTE inj, hotwired walbro, STM fuel Line kit, 3sx fuel loop, AEM EMS, E-85, FMIC......

WHP-492hp / 535trq on mustang dyno @ 21 psi (had sprak blow out so couldnt get over the 500whp but now have AEM twinfire CDI box)
1/4- ran 12.9 last yr @ 112mph (slipping clutch and bad tune (about 120hp less)
60 ft- 2.20 (HAHAHAHA)