E-Manage Water Temp

[Chris@Rvengeperformance]

I wired up my emu for stage 3 today and it all is working great except my water temp is reading 130 with a weird z next to the units.

I wired pin 63 from my obd1 harness to pin 32 on the greddy emu harness (dark blue/yellow). I have water temp enabled in the channel settings with knock turned off. I have also changed the unit to celsius.

Anyone know what I'm missing? My scanmaster reads ecu water temp just fine.

[Chris@Rvengeperformance]

nevermind boys, I had it on the wrong side of the plug/wrong pin. Works fine now.

[myhomieg]

mine is also reading 130. but i am using a boomsling. what was your issue?

[Chris@Rvengeperformance]

I'm not using a boomslang, it is all hard wired. I had it wired to the wrong thing. Double check that boomslang did their job and that you have the right harness setup.