My guide for door handles, locks, and switches. Step by step w/ pics!

[Gearheadvr4]

Thank you Alan! Hopefully this will help someone else in the future.

Jimvr4, your correct. I did show a picture of it but it wasn't explained in detail. I'll add that step. Thanks.

[GTOJOE]

It is a #3 screw bit. It fit perfect. A #2 slipped and wouldn't grab the screw. This was verified on 4 doors across 2 vehicles. I was surprised, but it is a #3.

Every door I have pulled apart on every brand of car has used a combination of #2 & #3.

Good write up BTW. Should hopefully help a bunch of ppl.