different a/c brackets??

[nodoze]

ok i did alittle searchign and did not find anything. so im working on this basket case of a car went to hook up the a/c compressor and noticed the bracket was missing. so i got online and ordered a a/c bracket for a tt , got it installed it and it looks as if the bracket accomodates a larger compressor than whats on the car. is their a difference between first and second gen brackets? whats the deal if any of you know . right now i cant bolt the compressor on because the bolt holes are like 1/4 inche to far apart and the compressor only has three spots for bolts buyt the bracket has four spots.

[nodoze]

btw i have never ran into this through all the engine changes i have done on these cars

[RealMcCoy]

Yes, the brackets are different between 1st and 2nd gen cars. Which one do you need?

[nodoze]

i need one for a first gen
heres the one i bought
3000GT Stealth AC compressor METAL MOUNTING BRACKET 4 B - eBay (item 360333887813 end time Feb-13-11 0828 PST)

[gltasn]

when i did a 1gen to 2gen conversion i had to grind off an inch off the 1st gen bracket to make it fit the sec gen oil pump. if you put a stack of washers or about a 1 inch section of tube you can make it fit.

[nodoze]

well the bracket bolts to the block just fine, just the compressor does not bolt to the bracket