e85 rough tune fp68hta

[11secondFWD]

Here is my first speed density log. 27psi, fp68hta, e85, the turbo really does flow the 47lbs/min like they advertise.

It was 46.8 lbs/min, 6950rpms, at the 27psi.

So if any td05 guys want a good tdo5 turbo that spools well and bolts right up, its a great choice.

Austin, I really think you should go with 2. I plan on a 10 sec pass with one, It would be crazy with 2 in your stealth with e85.

My tune is real rich. It is at like 11.8 until about 5500 then slowly drops down until 10.5 by 7k. I have to mess with my speed density tables. I am new to speed density and traffic has been busy. I need a dyno that isnt expensive as heck. But I just wanted to show the results of a tdo5 turbo for another option for any tdo5 guys. The billet wheel spools fast. I would look into matts too, I bet his spools even faster.

http://www.3sgto.org/f2/first-start-...etup-3538.html

Here is the pics of my turbo, if you didnt know the FP68hta. It flows about 5 lbs/min (50hp) more each than a e16g.

[11secondFWD]

My 1150cc injectors are about safely out. 80%IDC. I have base at 49psi already. I might have to bump up fuel pressure if the turbo ends up flowing more when I run 30+psi.

[Ninja Performance]

Looking good man. Nice to see someone whom always pushes and tries new setups (after pushing their current one of course)

-Chris

[11secondFWD]

Thanks Chris. I would have loved to push my FWDTT further but it didn't work out, so I decided to build the other car I owned instead. My main goal is to beat the 11.8 that my fwd made, which should be cake since the talon is AWD and is making over 400hp and is lighter (2500lbs). And its auto and I am leaving with 25psi and with the small 16g last year I went 12.2 @ a lowly 108.

Are you going to the NG this year? I know you were there in 07 and 09 when I went. I plan to go this year. I will be driving my new vr4 and drag racing the talon.

[Ninja Performance]

Not sure if we will make it. We are going to try!

-Chris