I am pulling the center cluster since the car is down. I got some nice overlays for the main cluster and was going to install them on the center ones also but then I decided that crap pillar pod was pissing me off so I figured I would move my boost gauge to the stock location. Since I am moving it I might as well put something in that reads numbers on it instead of just slashes for the oil press and water temp.
Now I am on a very tight budget. I don't have 200.00 per gauge to spend, otherwise I would consider a set of Defi or AEM to stick in there. I am avoiding STRI or Prosport. I will prolly go AutoMeter. I like the looks of the cobalt but full sweep is 200 a piece. The short sweep would go nicely and I could turn them and leave the stock plastic over the top of them. I don't need to know my oil press down to the .1 but I would like to be close within a couple of pounds. Same with the temp.
The question would be.. Is the short sweep as accurate as a 270 full sweep?
Again the budget is tight enough 2 70.00 gauges will put me almost over.
Thanks
Brandon
Bookmarks