Results 1 to 1 of 1

Thread: General 6g75/4 3.5-9L Info

  1. #1
    One day....it will be on 4 wheels. supporter Feedback Score 2 (100%)
    Join Date
    Sep 2010
    Owner Since
    2004

    Posts
    1,822
    Thanks
    154
    Thanked 37 Times in 30 Posts

    General 6g75/4 3.5-9L Info

    Before I start, the gospel for all of this has been from John Monnin, Ray Pampena and a few other crazy pioneers (you know who you are, feel free to stand up on this one )

    the most complete guide for this is here

    just a quick thread to throw some information out there about this combo..

    Mitsubishi's largest useful version of the 6g7x engine (so far) is the 6g75, the block itself is a royal pain in the arse to work with and requires far too much customization for anyone sane (aka not bdrank) to bother shoehorning in. HOWEVER the 75 crank is a drop into the 6g74 block, which is far easier to get into the 3sgto's engine bay seeing as most parts line up

    economically it's not worth going near putting the 6g74 block in your car unless your planning on going to 3.6L or above, below this it'll be easier to just use Ray's stroker/a stroker/bored stock engine.

    the pro's of the 6g74 block.

    1, Could in theory bore to 95/96mm bore allowing 3.9 Liters without touching the 75 crank
    2, It has larger bearings, which I'm told makes the crank stronger
    3, it takes the 6g75 crank, which in theory could be offset ground to give what 4.1L of displacement?

    to get all this running ignoring the getting of the block into the engine bay (covered very well on John's site) with the 6g75 crank you will need some lower compression 6g75 pistons (to get the 2mm downset) and some 6g74 rods.

    Another option for those people going this direction (aka hardcore) is to look at fitting the MIVEC heads that came off the 2006+ Eclipse & in Australia some of the Pajero's, these are known to be considerably harder to flex and flow craploads more air than the stock 72/74 heads italograsso recently made some stupid power with these on a 3.7L engine but I'll let him post up about that.
    Last edited by MR2; 09-13-2010 at 08:03 AM.
    Building a House, Car Mods on hold!
    1996 GTO, Owner since 2003.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
The 3000GT/Stealth/GTO Web History Project
3000gt.com
3000GT / Stealth International WWWboard Archive
Jim's (RED3KGT) Reststop
3000GT/Stealth/GTO Information and Resources
Team 3S
3000GT / Stealth / GTO Information
daveblack.net
3000GT/Stealth/GTO Clubs and Groups
Michigan 3S
MInnesota 3S
Wisconsin 3S
Iowa, Nebraska, Kansas 3S
North California 3000GT/Stealth
United Society of 3S Owners
3000GT/Stealth/GTO Forums
3000GT/Stealth International
3000GT/Stealth/GTO Event Pages
3S National Gathering
East Coast Gathering
Upper Mid-West Gathering
Blue Ridge Gathering