FS: 356mm Rotor Ksport Big Brake kit $1500 inc NEW better rotors + Yellow stuff pads

[IPD]

i'm interested, but i really need them to look OEM, not flat-black. my stock calipers already have a rattle-can job.

what i'm REALLY worried about is the shipping. my first choice was d2's; but ksports are mechanically identical--and these are a few hundred cheaper with upgraded rotors. then again, it's my DD, so high-dust pads aren't really something i'm looking for...

decisions, decisions....

[MR2]

well, the Green crap pads are ment to be dust free... freight wise looking at the Australia Post site for Seamail your going to look at ~$183

FWIW express services are $300 (2-4 business days)

I'm not sure if you'd want them to look oem...you prefer the ugly Orange? ? guess I don't really care either way

[IPD]

ok. so you'd want $1683 to be shipped to CONUS.

...gonna have to think that one over for a while...

[MR2]

and you need to measure your Hubs for me, the brake Hubs had to be machined out for the GTO Hubs (stock they were slighly to tight) I'll measure my hubs over the weekend so you know what your dealing with.

[IPD]

well then i guess it's a no-go, cause i'm nowhere near my car. GLWS!

[MR2]

yeah that's cool, I'm be careful as you'd not want to get it and then discover something wasn't quite right. the only reason I'm putting these up in the aussie section is it's probably not worth shipping out of Aus.


actually, you could just ask on the forums if any other stealth owners have ever measured their hubs....


googling replacement hubs, it looks like the Stealth Hub is 69mm, apparently the VR4 is 67.1mm (wtf?), I believe the GTO Hub is 73mm...they'll still work...but not centered by the hub :|

[GTOJOE]

GTO hub is 67mm. I measured it on the weekend they are all the same IIRC

[MR2]

ok, I'll go measure them, I know the rotor hats had to be machined to fit just right.

[MR2]

Here we go with Pix

showing the new rotors!!





old rotors:




Showing as currently attached:

Hub is actually 67.3 as discussed


Currently attached:

[MR2]

the fitment card I've made for the 380mm kit:



craploads of spoke clearance:


around 3-4mm of barrel clearance



The actual caliper...going to have to spray it black again ;|


the fitment template for the 380mm (note that the number that's 215 for mine will be 200 for yours..or I assume so, still waiting on the card itself)
http://3000gt.com.au/car/Misc/Brakes.../380-400-1.jpg