Rebuilding Transmission...

[BigBoris]

Yeah, I hear the rumors but if it was true then by now ebay would not allow them to use the site. I would only imagine...

My part has already been shipped. So the only bad thing that can happen now is its not what they said it would be...

[stealthee]

Yeah, I hear the rumors but if it was true then by now ebay would not allow them to use the site. I would only imagine...

My part has already been shipped. So the only bad thing that can happen now is its not what they said it would be...

Which is exactly there problem. They ship the wrong stuff all the time then claim you are lying. Hell they were selling an "axle" from a 3s on ebay. Only problem was it was only the very end of the axle and they said it wasn't broken.

[BigBoris]

Well lets hope I dont have that issue... Lets be positive here.

[BigBoris]

So here is an update, only thing I'm waiting for now is the differential from MikesAutoUSA that will be delivered on Monday!

I got the bell housing welded and it looks good IMO.

Already got all the gears in place.





I hope this is the right transmission oil 85W-140 GL-5, MT-1, is 2 enough?

[Hans@GZP]

That's too thick of a gear oil. Our transmissions use a 75-90. I just use Pennsoil Synchromesh for the fwd transmissions. You'll want to get 3 quarts. It should take just over 2.

[DrGonzo]

That's too thick of a gear oil. Our transmissions use a 75-90. I just use Pennsoil Synchromesh for the fwd transmissions. You'll want to get 3 quarts. It should take just over 2.

Agreed with the Pennsoil Synchromesh! It's good stuff for these trans. My last FWD trans had some grinding in 1st-2nd. Changed out to the Pennsoil and all gone. Something about the FWD syncro's just works well with that oil.

[BigBoris]

Well in MikesAutoUSA defense I have to say that I am another Satisfied customer. I got exactly what I ordered in excellent conditions!

Ok well, I'm done! its all put back together and I posted a new thread as a guide. Check it out please let me know what you think.