Page 1 of 12 12311 ... LastLast
Results 1 to 10 of 112

Thread: My Twin 20G Build

  1. #1
    Forum User Feedback Score 0
    Join Date
    Sep 2010
    Owner Since
    2005

    Location
    Houston
    Posts
    55
    Thanks
    0
    Thanked 0 Times in 0 Posts

    My Twin 20G Build

    Hey guys, I thought I'd post this thread up here to share pictures and keep my progress on this car updated as often as possible for you. There is a lot of custom work done to this car which I am willing to discuss. I am also very open to criticism, suggestions, questions, and anything else that can contribute not only to my build, but the community as a whole.

    Alan, is it ok that I post the link to my old thread on 3si as a reference? I know there were a lot of important questions and topics discussed, and it would be a waste to just throw it away.

    I am going to also reserve the next couple posts to keep the pictures in a nice, orderly and presentable fashion to track the progress from the beginning to the very end.

    What does the build consist of?

    Twin TD06H-20G Compressors mated to TD05H 6cm Turbines with internal wastegates welded shut
    Tial 38mm Wastegates and BOV
    Custom built Equal Length Longtube Headers and O2 Housings
    GT-PRO FMIC
    2.5" Custom Charge Pipes from Turbos to FMIC
    3" Custom Charge Pipes From FMIC to TB
    Custom Driver's Side Intake Manifold with 90mm Q45 Throttle Body
    DR Stage III Heads and IPS 272 Cams
    UR Cam Gears
    ARP Head Studs
    AEM EMS with all accessories
    PTE 780cc Injectors
    Twin Walbro Fuel Pumps
    SSB Fuel and Oil Lines
    Aeromotive AFPR
    Mishimoto Radiator and Slim Fans
    Corbeau Fx1 Pro Seats, Harnesses and Brackets
    Broomfield Racing Billet Transfer Case Housings and 300m Output Shaft

    What's left to do?

    Oil Feed Lines
    Vacuum Lines
    Transfer internals and Install transfer case
    Install Timing Cover, Heater Hoses and Spark Plugs
    Put the rest of the interior together
    Tune the Car

    Pics of the car before the build began:



    Last edited by 20G_VR4; 09-12-2010 at 09:40 PM.

  2. #2
    Forum User Feedback Score 0
    Join Date
    Sep 2010
    Owner Since
    2005

    Location
    Houston
    Posts
    55
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Build Pictures:










    Last edited by 20G_VR4; 09-12-2010 at 09:41 PM.

  3. #3
    Forum User Feedback Score 0
    Join Date
    Sep 2010
    Owner Since
    2005

    Location
    Houston
    Posts
    55
    Thanks
    0
    Thanked 0 Times in 0 Posts







    Last edited by 20G_VR4; 09-12-2010 at 09:45 PM.

  4. #4
    Forum User Feedback Score 0
    Join Date
    Sep 2010
    Owner Since
    2005

    Location
    Houston
    Posts
    55
    Thanks
    0
    Thanked 0 Times in 0 Posts








    Last edited by 20G_VR4; 09-12-2010 at 09:45 PM.

  5. #5
    Forum User Feedback Score 0
    Join Date
    Sep 2010
    Owner Since
    2005

    Location
    Houston
    Posts
    55
    Thanks
    0
    Thanked 0 Times in 0 Posts






    Last edited by 20G_VR4; 09-12-2010 at 09:56 PM.

  6. #6
    Still under construction -_- Not Verified Feedback Score 3 (100%) MNRVR4's Avatar
    Join Date
    Sep 2010
    Owner Since
    2008

    Location
    Hubert, NC
    Posts
    57
    Thanks
    8
    Thanked 6 Times in 3 Posts
    O_o ........ O...M...G im in shock right now lol, how long has it take you so far? From when you started to where you are right now? Keep up the good work man! and let us know what she puts out!
    Last edited by MNRVR4; 09-12-2010 at 09:53 PM.

  7. #7
    Forum User Feedback Score 0
    Join Date
    Sep 2010
    Owner Since
    2005

    Location
    Houston
    Posts
    55
    Thanks
    0
    Thanked 0 Times in 0 Posts








    Last edited by 20G_VR4; 09-12-2010 at 09:53 PM.

  8. #8
    Forum User Feedback Score 1 (100%)
    Join Date
    Sep 2010
    Owner Since

    Posts
    73
    Thanks
    7
    Thanked 3 Times in 3 Posts
    AHHHHH Holy shit that is badass, you're doing a fine job with all that fabrication :O

  9. #9
    Member verified Feedback Score 0 DocWalt's Avatar
    Join Date
    Sep 2010
    Owner Since
    Oct '08 - Oct '10

    Location
    Royersford, PA
    Posts
    3,841
    Blog Entries
    1
    Thanks
    1,070
    Thanked 442 Times in 317 Posts
    Hot damn. That is badass. Great fab work!
    R135
    ╚╬╬╝
    - 24

  10. #10
    Forum User Feedback Score 0
    Join Date
    Sep 2010
    Owner Since
    2005

    Location
    Houston
    Posts
    55
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Markoverclock from Turbochargers.com is doing 99% of the fab work. I just installed the seats and thats about it. I give him a helping hand whenever he needs is, but I dont have the technical expertise to do any of the fab work shown in the pictures. In fact, you can see him in some of the pictures. It has taken 2 1/2 years so far working a couple hours on a few Sundays each month. This actually went from a simple header/turbo fab into an all out build. The might as well syndrome kicked in very early on.
    Last edited by 20G_VR4; 09-12-2010 at 10:07 PM.

Page 1 of 12 12311 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
The 3000GT/Stealth/GTO Web History Project
3000gt.com
3000GT / Stealth International WWWboard Archive
Jim's (RED3KGT) Reststop
3000GT/Stealth/GTO Information and Resources
Team 3S
3000GT / Stealth / GTO Information
daveblack.net
3000GT/Stealth/GTO Clubs and Groups
Michigan 3S
MInnesota 3S
Wisconsin 3S
Iowa, Nebraska, Kansas 3S
North California 3000GT/Stealth
United Society of 3S Owners
3000GT/Stealth/GTO Forums
3000GT/Stealth International
3000GT/Stealth/GTO Event Pages
3S National Gathering
East Coast Gathering
Upper Mid-West Gathering
Blue Ridge Gathering