Results 1 to 8 of 8

Thread: Is there something missing???

  1. #1
    Never finishes any verified
    Feedback Score 8 (100%) DrGonzo's Avatar
    Join Date
    Sep 2010
    Owner Since
    2001

    Location
    Wake Forest, NC
    Posts
    2,569
    Thanks
    54
    Thanked 197 Times in 140 Posts

    Is there something missing???

    So working on the car today found that the trans end cap had come off! Luckily it was caught within the splash guard so I didn't loose it. After getting the wheel and splash guards off I found that the shaft looked a little funny!

    Is there supposed to be a bolt or something in there? I looked down the hole and I don't see anywhere for one to thread into. All of the images I say online had a bolt or something in that hole.

    Any Ideas???

    Click for full res image!

    Check it out on Youtube!!


    93 Stealth TT - The Stealth Project

    Renegade Tech Works ECS Controller on Intrax Springs
    Chrome ECU
    Hybrid 13g's
    EVO 560cc Injectors
    Spec Stage 3 clutch
    Ninja Performance Output shaft & Input spool
    Ninja Performance Solid Tensioner & Gates racing T-Belt
    CX Racing Dual Core FMIC
    Megan SS Exhaust
    Fidanza Cam Gears and Clear Covers
    3rd Gen Lifters
    HKS BOV
    K&N FIPK
    Maximal High flow converter
    Walbro FP & FuelLab FPR
    Maximal and Seattle Solid Mounts
    All -6an Lines
    Custom -6AN coolant neck lines
    AWS/ABS/Cruise Delete
    MP Rear Control Arms
    SS Brake Lines
    99 Front Conversion
    2nd gen Rear Bumper
    99 Combat Wing
    Complete interior LED Swap
    Skillard Fuel channel
    Oohnoo FPR Bracket
    .
    .
    More to Come......

  2. #2
    The one. The only. verified Feedback Score 14 (100%) stealthee's Avatar
    Join Date
    Sep 2010
    Owner Since
    August 28, 2002

    Location
    SWPA
    Posts
    4,086
    Thanks
    182
    Thanked 700 Times in 530 Posts
    If I remember right the big thing just inside the hole is the bolt. It takes an allen key to remove it.

    [06-05, 19:29] OhioSpyderman: Brian, finding a woman is NOT the answer, you need to shop for a good VACUUM

  3. #3
    Forum User Feedback Score 0
    Join Date
    Sep 2010
    Owner Since

    Posts
    622
    Thanks
    10
    Thanked 26 Times in 25 Posts
    Someone lost a `box due to the endcap comming off so you`ve caught that one just in time!.
    GTO-TT, PTE 1200's, M20, Emanage Ultimate, OS Geiken R3C,
    TD04-16g`s, Maf-t. 13g`s 12.4@115mph / 16g`s 12.5@117mph.

  4. #4
    Never finishes any verified
    Feedback Score 8 (100%) DrGonzo's Avatar
    Join Date
    Sep 2010
    Owner Since
    2001

    Location
    Wake Forest, NC
    Posts
    2,569
    Thanks
    54
    Thanked 197 Times in 140 Posts
    So I got confirmation that I am not missing anything. It just looks funny cause apparently someone stripped out the allan head and welded on a nut to remove it. They than cut off the nut after re-installing the nut instead of replacing it.

    I was so worried that something had fallen off when the cap popped off. Good to know I just need to re-install and seal the end cap.

    Thanks everyone!

  5. #5
    Never finishes any verified
    Feedback Score 8 (100%) DrGonzo's Avatar
    Join Date
    Sep 2010
    Owner Since
    2001

    Location
    Wake Forest, NC
    Posts
    2,569
    Thanks
    54
    Thanked 197 Times in 140 Posts
    Fucking Damn it!!!!

    I have to figure out a way to get that damn nut off now as I need to re-shim the rear input bearing as I found that is what is causing all the damn trans rattling noise!!!

    Any Idea's?!?!?

  6. #6
    Forum User Feedback Score 0
    Join Date
    Sep 2010
    Owner Since

    Posts
    504
    Thanks
    11
    Thanked 84 Times in 75 Posts
    Quote Originally Posted by DrGonzo View Post
    Fucking Damn it!!!!

    I have to figure out a way to get that damn nut off now as I need to re-shim the rear input bearing as I found that is what is causing all the damn trans rattling noise!!!

    Any Idea's?!?!?
    Weld a nut onto it maybe............
    For sure replace it with a new one afterward.

  7. #7
    One day....it will be on 4 wheels. supporter Feedback Score 2 (100%)
    Join Date
    Sep 2010
    Owner Since
    2004

    Posts
    1,822
    Thanks
    154
    Thanked 37 Times in 30 Posts
    just weld a shit socket onto it like the last guy looks like he did, then get new bolt...can't be worth much
    Building a House, Car Mods on hold!
    1996 GTO, Owner since 2003.

  8. #8
    1st ever COTM and COTY verified Feedback Score 9 (100%) green-lantern's Avatar
    Join Date
    Aug 2010
    Owner Since
    Birth

    Location
    Tennessee
    Posts
    7,250
    Thanks
    654
    Thanked 459 Times in 354 Posts
    Bummer, yeah I guess I'd just weld something to it like the last guy did.

    Quote Originally Posted by HilbillyHomeboy View Post
    I bet she smells of old mustard and sawdust.
    Jeremy

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
The 3000GT/Stealth/GTO Web History Project
3000gt.com
3000GT / Stealth International WWWboard Archive
Jim's (RED3KGT) Reststop
3000GT/Stealth/GTO Information and Resources
Team 3S
3000GT / Stealth / GTO Information
daveblack.net
3000GT/Stealth/GTO Clubs and Groups
Michigan 3S
MInnesota 3S
Wisconsin 3S
Iowa, Nebraska, Kansas 3S
North California 3000GT/Stealth
United Society of 3S Owners
3000GT/Stealth/GTO Forums
3000GT/Stealth International
3000GT/Stealth/GTO Event Pages
3S National Gathering
East Coast Gathering
Upper Mid-West Gathering
Blue Ridge Gathering