Does anyone still make solid rear diff bushings?

[rawavr4]

Any downsides to solid mounts there? Vibration/noise? More or less wear on other parts?

Only downsides I've experienced is if there are any loose interior parts on the car, you'll hear them due to the vibration (Then you know what to tighten, so not so bad after all). But that's only when taking off from a stop. If you interior is tight then you probably won't hear anything. And phantom knock which some people get. Vibration at idle isn't as bad as most people say. My dad DDs a caddy and has never commented on my cars vibration when he drives it. I recommend them.

[HLxDrummer]

Cool, thanks for the info! I'll have to get some solids for the rear when I do all the bushings then

[rawavr4]

Bump up top

[Austin@STM]

forgot about this, you still want my bushings Terry?

[rawavr4]

I did too lol

[rawavr4]

Something Like these
3000GT/Stealth International Message Center

[ViperZ]

I've got a set of diff bushings that Maximal can borrow, I've got them off the car right now and it will be down for awhile. If you wanted to do subframe bushings too I've got those too.

[Caswell239]

Is 3sx the only place to buy all the bushings for the car in poly.??

[Chatzvr4]

i believe c3 motorsports has put together a kit. give them a call they are one of the sponsors here

[rawavr4]

I didn't see anything on their site, and their drivetrain section doesn't show any parts.