2fnould's build log

[2fnloud]

OK, I started fastening all these pieces together to prevent anything from flying up at me in the event of an accident. So far, it is all going as planned:

3/8" anchors:


There are covers for the bolts:


They are attached to these blocks that are attached to the false floor, using 3/8" bolts again:


Height of the bulkhead meets the bottom of the back seats perfectly:


Angle steel attached to the false floor for the small bulkhead:


With elongated holes to allow minor adjustments to the height of the small bulkhead to the top of the subwoofer boxes, the Line-X will affect the overall height.

[2fnloud]

I am wanting some opinion on this:

I have been designing this whole system to still have the ability to secure the sunroof in the original location. Here is what I have so far.

I do not care for how the PVC posts stick out like a sore thumb but I think once coated in Line-X it will not be so bad.

What say any of you?

[j2k4]

Piece-o-cake:

Carefully wrap them with carpet/speaker-cloth.

[2fnloud]

Piece-o-cake:

Carefully wrap them with carpet/speaker-cloth.

Dude, they will be line-x coated, with a black felt pad top or rubber coated. I am asking if the posts sticking up will cheapen the whole install?

[2fnloud]

I got my amps today too!!

[j2k4]

i got my amps today too!!

noice!!

[DocWalt]

I'd make the posts removable somehow.

[2fnloud]

Cold weather and Christmas events have slowed down my progress:

[2fnloud]

UPDATES!!!!! With Christmas done, year end completed with the financials at the my church, (I am the treasurer and do Payroll), and along with the weather being a little nice....I was able to address the sunroof holders with a MUCH better idea:

I designed some brackets to hold the front in a similar fashion as the OEM held them before I installed my TecPerfomance rear strut bar.

A huge shout out to Corey Brabant for helping make these brackets a reality.

[DocWalt]

The brackets came out really well! Good work on the design and props to CoreyB for getting it done