Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Just bought 19t's fromIPS

  1. #1
    Forum User Not Verified
    Join Date
    Nov 2010
    Owner Since
    2007

    Location
    Midland,MI
    Posts
    172
    Thanks
    0
    Thanked 1 Time in 1 Post

    Just bought 19t's fromIPS

    Got some 19t's from IPS's Black Friday Sale. I am running PTE 550's right now with an SAFC2,FMIC,Walbro 255,AFPR,IPS single exhaust, ect.... Anyway, do you guys think that the 550's can handle the 19t's on 17psi? If not can I get 680's or so and still use the SAFC2 to tune it?

  2. #2
    seize the carpe!
    Join Date
    Sep 2010
    Owner Since

    Posts
    233
    Thanks
    5
    Thanked 3 Times in 3 Posts
    depends on your fuel pressure, I would say your safe but I would start to look for a better piggyback or even a stand alone.

  3. #3
    rawr. verified
    Join Date
    Sep 2010
    Owner Since
    August 2009

    Location
    San Diego, CA
    Posts
    1,119
    Thanks
    21
    Thanked 29 Times in 23 Posts
    Welcome to the IPS 19Ts club!

    To start don't go standalone, you would hate having to spend a shop 1000s of dollars to tune your car when you can tune it yourself and that money can be spent on other parts

    My friend cho is on SAFC2/SITC combo with water/meth injector and 660cc injection on EV03 16Gs so it is proven time and time again, you might able to boost that much psi however being on pump gas you would want to get timing control, if you can find a SITC for timing that would benefit you a lot, also you can up you fuel pressure around 52-53, that is what I did.
    vroom vroom i drive a 93 toyota mr2.

    https://car.social

  4. #4
    1st ever COTM and COTY verified
    Join Date
    Aug 2010
    Owner Since
    Birth

    Location
    Tennessee
    Posts
    7,077
    Thanks
    649
    Thanked 451 Times in 347 Posts
    Quote Originally Posted by whitedevilstealth View Post
    Got some 19t's from IPS's Black Friday Sale. I am running PTE 550's right now with an SAFC2,FMIC,Walbro 255,AFPR,IPS single exhaust, ect.... Anyway, do you guys think that the 550's can handle the 19t's on 17psi? If not can I get 680's or so and still use the SAFC2 to tune it?
    Yes I do, I think you will be fine as long as the fuel pump is hot wired.

    Quote Originally Posted by HilbillyHomeboy View Post
    I bet she smells of old mustard and sawdust.
    Jeremy

  5. #5
    Forum User Not Verified
    Join Date
    Nov 2010
    Owner Since
    2007

    Location
    Midland,MI
    Posts
    172
    Thanks
    0
    Thanked 1 Time in 1 Post
    Yes the walbro is hotwired

  6. #6
    Forum User
    Join Date
    Sep 2010
    Owner Since
    2002

    Location
    Delaware
    Posts
    990
    Thanks
    94
    Thanked 85 Times in 61 Posts
    Pick up a water/meth kit and the 550's will be fine since you can spray about 100hp worth of methanol pretty easily and make big pump gas power to boot.

    550's are good on gas only for about 550awhp, so they are plenty of injector for the entry level TD04's like the 19T's...

    Jason

    Silverstone Metallic 94 R2 FD and a Silver 2015 F250 Lariat Ultimate CCSB 6.7PSD
    Sold: Black 99 VR4 and two Pearl White 93 VR4's. Just say NO to FMIC's

  7. #7
    1st ever COTM and COTY verified
    Join Date
    Aug 2010
    Owner Since
    Birth

    Location
    Tennessee
    Posts
    7,077
    Thanks
    649
    Thanked 451 Times in 347 Posts
    Quote Originally Posted by green-lantern View Post
    Yes I do, I think you will be fine as long as the fuel pump is hot wired.
    I should revise this by saying all cars are different. It really depends on the health of your engine ect. Different cars can handle more or less boost so just start low and see what it can do.

  8. #8
    Forum User Not Verified

    Join Date
    Sep 2010
    Owner Since
    2004

    Location
    Cape Girardeau
    Posts
    4,791
    Thanks
    365
    Thanked 296 Times in 214 Posts
    oh yeah they will be plenty for that boost.

    I'm running enough fuel pressure for my injectors to be about 575cc and I'm running about 80% IDC at 16 PSI of boost at around 10.9 AFR. Plenty of room to lean out and lower IDC even further.

    Parting 6 speed
    Pampena 3.5 Stroker, GTX 2867 Gen IIs, AEM Series2, oohnoo SMIC, DN Hardpipes, FIC 1650s, Walbro 525, aermotive fpr, Dejon intake pipes, Tial Q, Koyo Rad, Samco Hoses, Stoptech 332mm fronts, HKS GT4 Coilovers, Spec 4+ LW, JDM 6 Speed, Billet shift forks, Pampena brace

  9. #9
    Forum User Not Verified
    Join Date
    Nov 2010
    Owner Since
    2007

    Location
    Midland,MI
    Posts
    172
    Thanks
    0
    Thanked 1 Time in 1 Post
    I was considering water/meth. I was looking at the snow performance stage 1 boost cooler but I dont think it comes with any safety features.

  10. #10
    Forum User
    Join Date
    Sep 2010
    Owner Since

    Posts
    622
    Thanks
    10
    Thanked 26 Times in 25 Posts
    Anything over 550`s and you want to be looking into dual pumps, my hotwire walbro is spent at 65% DC on the PTE 780`s.
    GTO-TT, PTE 1200's, M20, Emanage Ultimate, OS Geiken R3C,
    TD04-16g`s, Maf-t. 13g`s 12.4@115mph / 16g`s 12.5@117mph.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
The 3000GT/Stealth/GTO Web History Project
3000gt.com
3000GT / Stealth International WWWboard Archive
Jim's (RED3KGT) Reststop
3000GT/Stealth/GTO Information and Resources
Team 3S
3000GT / Stealth / GTO Information
daveblack.net
3000GT/Stealth/GTO Clubs and Groups
Michigan 3S
MInnesota 3S
Wisconsin 3S
Iowa, Nebraska, Kansas 3S
North California 3000GT/Stealth
United Society of 3S Owners
3000GT/Stealth/GTO Forums
3000GT/Stealth International
3000GT/Stealth/GTO Event Pages
3S National Gathering
East Coast Gathering
Upper Mid-West Gathering
Blue Ridge Gathering