Results 1 to 9 of 9

Thread: !!! New STM One Piece S.S. Clutch Line From Master To Slave Just $44 Shipped !!!

  1. #1
    Forum User
    Join Date
    Sep 2010
    Owner Since

    Posts
    1,187
    Thanks
    4
    Thanked 73 Times in 56 Posts

    !!! New STM One Piece S.S. Clutch Line From Master To Slave Just $44 Shipped !!!

    We have another product to release this week, the STM 1 piece clutch line for the 3s. Not only does this replace the soft rubber section of the clutch line, it also replaces both hard lines as well.



    This line is much easier to work with as both ends feature -3 AN fittings so they come apart very easily when you want them to. Also being flexible means you can put it wherever you want. There is a little extra length to it so you can run it high or low to clear whatever setup you are running. It is also plastic coated so it wont scratch or wear through anything either.



    So if your factory line is starting look worn out and rusty, or if your fittings are getting rounded over from being removed before, or maybe your just looking for a nice piece to dress up your engine bay this is for you




    For anyone crazy about weight reduction this also saves about 8 ounces over the stock line.

    These can be found on the website HERE, or just send paypal to Sales@StreetTunedMotorsports.com
    In the note put STM 3S Master to Slave clutch line.

    Price will be $44 shipped (add 8% NY residents, contact for international shipping)

    As always if you have any questions feel free to PM me or call the shop.

    -Austin@STM

    -Ricer Evo 8: 8.75 @ 166 Best MPH of 167. Quickest 4G63 Powered Evo in The US!!!
    -Chris Cessna's Stock short block Evo 8: 9.76@150 Worlds Fastest Stock Motor Evo 8 and First Stock Block In The 9's!
    -Shawna's DD Evo 8: 9.97@143.88 Best MPH of 145 Full leather interior, A/C, navigation, stock brakes, cruisin 9's in style
    -Cory's Stock 7 bolt talon: 10.3@136 No crank walk here...
    -STM Stock turbo/motor Stealth RT: 10.95@127 Worlds Quyickest/Fastest and most powerful Stock turbo/ motor 3S
    -James STM built Pump gas Evo8 stock motor: 10.2@137 Stock long block, and only on pump gas!
    -Mike Faggiano Evo3 16g stock motor 1g 11.0@124 just a 16g knockin on 10's door.
    And the list goes on...

  2. #2
    Forum User Not Verified
    Join Date
    Dec 2010
    Owner Since
    2007

    Location
    Long Island
    Posts
    37
    Thanks
    4
    Thanked 0 Times in 0 Posts
    What is the typical routing for this line on a stock setup? I'm rebuilding my master and slave cylinder and this is all I need to finish it up. Also what else does this improve over stock beisdes weight?

  3. #3
    Forum User Not Verified
    Join Date
    Sep 2010
    Owner Since

    Posts
    107
    Thanks
    19
    Thanked 5 Times in 4 Posts
    Quote Originally Posted by AWDBoostin View Post
    What is the typical routing for this line on a stock setup? I'm rebuilding my master and slave cylinder and this is all I need to finish it up. Also what else does this improve over stock beisdes weight?
    The stock rubber lines expand with heat. With these SS clutch lines you should have a more solid feel to your clutch pedal.

    Nice looking product.

  4. #4
    Forum User Not Verified
    Join Date
    Sep 2010
    Owner Since
    2006

    Location
    Bamberg, Germany
    Posts
    604
    Blog Entries
    2
    Thanks
    3
    Thanked 22 Times in 16 Posts
    bought one a couple weeks ago when I ordered my Fuel setup

    3000GT of Europe
    www.3sofeu.org/main
    Cherry Hill Mitsubishi Coupon Code- 3SE

  5. #5
    Forum User
    Join Date
    Sep 2010
    Owner Since

    Posts
    1,187
    Thanks
    4
    Thanked 73 Times in 56 Posts
    As far as effect on the car, the full line, and the short one the just replaces the rubber part, will give the same stiffer feel, and more "precise" pedal.

    The difference for the long line is it does a few other things.

    1) On some cars it gets rid of all the crap that is in line with the clutch, and just makes it a straight shot, no joints, or restrictions.
    2) Our cars are a lot older now fittings are getting rusty, or rounded over from being taken on and off over the years. This replaces everything so you dont have to worry about fittings getting stripped out or rounded.
    3) It is also a nice dress up piece, it removes a couple of brackets, and can run along whatever other lines or hoses may have been added to the car, or fit around a custom turbo setup.

    -Austin@STM

  6. #6
    1st ever COTM and COTY verified
    Join Date
    Aug 2010
    Owner Since
    Birth

    Location
    Tennessee
    Posts
    7,077
    Thanks
    649
    Thanked 451 Times in 347 Posts
    Cool, I'll probably be getting one of these soon.

    Quote Originally Posted by HilbillyHomeboy View Post
    I bet she smells of old mustard and sawdust.
    Jeremy

  7. #7
    I have mine on for a few weeks. Feels nice

  8. #8
    One day....it will be on 4 wheels. supporter
    Join Date
    Sep 2010
    Owner Since
    2004

    Posts
    1,804
    Thanks
    153
    Thanked 37 Times in 30 Posts
    God I'd love to have this...my clutch has no less than 3 loops in it and attach's to the chassis in 3 spots (2 on GB, 1 on GB Mount) what a mess oh well, in a few months.
    Building a House, Car Mods on hold!
    1996 GTO, Owner since 2003.

  9. #9
    Forum User Not Verified
    Join Date
    Dec 2010
    Owner Since
    2007

    Location
    Long Island
    Posts
    37
    Thanks
    4
    Thanked 0 Times in 0 Posts
    Hmm I'm going to have to pick one of these up! I was going to order one yesterday, but then I remembered this thread. My car is stripped down right now due to a bad head gasket and I have a lot of rust in the engine bay. Slowly cleaning it all up now. Definitely going to need the full line.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
The 3000GT/Stealth/GTO Web History Project
3000gt.com
3000GT / Stealth International WWWboard Archive
Jim's (RED3KGT) Reststop
3000GT/Stealth/GTO Information and Resources
Team 3S
3000GT / Stealth / GTO Information
daveblack.net
3000GT/Stealth/GTO Clubs and Groups
Michigan 3S
MInnesota 3S
Wisconsin 3S
Iowa, Nebraska, Kansas 3S
North California 3000GT/Stealth
United Society of 3S Owners
3000GT/Stealth/GTO Forums
3000GT/Stealth International
3000GT/Stealth/GTO Event Pages
3S National Gathering
East Coast Gathering
Upper Mid-West Gathering
Blue Ridge Gathering